Search results

Not sure if I needed to start a new thread, but found this one. I too have been noticing this 30 second delay between a motion alert and my phone notifying me. I have found somewhere, I can't remember.. to fix this, you need to remove your mobile from blue iris console and re-add it. That...

Thanks wittaj, so what happens if a person buys one of the extended subs but never has purchased BI before.. do they even get that option?

Sorry, I know this thread is old, but didn't want to create a new one just for this. My sub expired a few weeks ago.. would I be able to purchase the extend subs or will I have to buy the full thing all over again?

Lately I have been having some issues with Push Notifications and Exporting/Loading Settings. There is another thread dealing with the Push Notifications and wanted to create a new thread for the Settings issue. When exporting settings..what does that actually save? I ask because I notice when...

It also doesn't work on my Samsung smartphone either. So I guess that version won't help me on Android?

This is the same way with mine. My BI version is 5.8.7.11. Not sure if that is the version you are referring to.

This started happening to me as well. In the past, I have tried the removing the smartphones and readded them and that has worked in the past. This time, I can't get it to work. None of my phones are getting a notifications at all. Every time there's a motion alert and I open the app, I see the...

Hello, I need a little help regarding the pre-trigger vs post-trigger. I read the manual, but I just don't seem to grasp how they really differ and not sure which one I should use. Can anyone in layman's terms explain which one should be used? Also, been trying to understand the new Static...

I also have this AD410 doorbell and notice it keeps disconnecting/reconnecting from wifi every few minutes. It has great signal strength as the router is just a few feet away. Sometimes it goes 45-50 minutes without dropping and other times only a few minutes. It behaves the same on 2.4ghz and...

Also.. it didn't detect the driver either...well, it did..but it cancelled it as nothing found.

so adding truck to the "mark as vehicle" doesn't do that? What is that section for then?

Hello, I'm trying to figure out why is it that some times my cameras, specially my main one on my driveway..it will detect a car or delivery truck that comes in at 92%, but it will delete the motion as "nothing found". Then, later on, it will detect fine. Trying to understand which setting I...

Ah.. that makes more sense now!.. thank you sir!

But, wouldn't it be the same since once the video feed is sent by the main router, it includes both the POE cameras and the wireless ones on the same wireless signal? What I mean is.. in the end, the router will have to carry all feed coming from different places because all feed/signals will...

@wittaj I was able to have the POE switch directly connected to the Blue Iris machine and the wireless cameras to the main router (2 NICS). They are all segmented on different Networks. Besides security reasons..does having the 5MP POE cameras connected directly to the BI machine instead of...

Just confirming.. went back and installed YazFi and set it up how it was before with the vlans.. everything works as normal! Thanks for your patience.

I got a response from Ken from Blue Iris.. the issue has been resolved. The other day, I changed the setting in the webserver tab to none, thinking it would just apply the max bitrate for each camera automatically... I wanted to be able to view the cameras without pixelation in the web...

Ok.. I uninstalled YazFi, rebooted the router. Also, I only left the 3 5MP cameras connected to Blue Iris.. those are the only ones there. Same issue...all 3 are fine on the Console, but only 1 will show live on the app... the other 2 only spin and spin UNLESS they detect motion, then I can view...

I will try to remove the YazFi feature and go back to how I had them in the past which were working fine at all times. But yes, this issue started AFTER I setup vlans using the YazFi feature in the Asus router. I was so happy I was able to get these cameras on a different Network, but if it's...

They are POE cameras from 2021, but the issue is only when trying to view them via the app. There is no issue on the Console at all, at any time. It's only when viewing via the app. The confusing part for me is.. if it was something wrong with the camera or maybe the wires...why is there no...

I may have spoken too soon! The issue has come back...but, I have been monitoring it. Once it started happening gain, I readded the cameras again and it went away, but then it came back the next morning. What i have noticed is, the issue goes away at night...during the night I can view the...

I was able to determine it was some how the configuration of those cameras got messed up while I was moving them?! I tested the ethernet cable by assigning them with the same IP address of the POE camera that worked fine and the issue went away.. so that told me the Ethernet cable was fine and...

Ok.. so I have spent a few hours trying to figure this thing out.. checked the ethernet cable and it seems fine on both cameras. I notice if I stand in front of the cameras and it detects me, then I can start to see them in the blue iris app, but once I get out of its view and no motion is...

I didn't have to unplug the cameras to move them as I only moved them a few inches. My router has VLAN option (YazFi) so Blue Iris cameras are segregated. But yes, I agree with you. I don't think it's an issue with Blue Iris..but I am still confused as to why it only affecting the wireless...

One POE switch for my 3 POE cameras and that's connected to an Asus RT-AC86U wireless Router. All cameras are on a different Network from the main. @wittaj Yes, they have water proofing and all are under a soffit which never gets wet. But, why would it only affect the wireless signal though? -...

But why only those 2 cameras that I moved? I've had them for years and I never had this issue. Only started happening after I moved them. I also thought about the throughput and disabled other cameras, but the issue persists. My other POE camera and all the rest work as normal.

Hi guys... I started having a weird issue recently and I cannot figure out what's wrong. I recently had to relocate a couple of POE cameras due to my gutter downspouts were in the way and blocking some of the view. The cameras were there first before the gutters ( and the gutters needed to be...

I found the setting! In the Console, I clicked on the Edit Layout.. and I noticed the Height was set to Auto...so I changed it to 2160p and the pixelation went away. I wonder why Auto didn't use the right resolution.

Not sure what you mean by "base server". If you mean this... I have it unchecked to get the full bitrate. In UI3, it is already selected to use 2160 4K, not VBR.

I am using UI3 and I have clicked the 3 dots.. it's using the same profile, Streaming 0, but it says VBR. and it's set to "No Limit". The Stream is set to 0 and the one on the UI3 which is also set to Streaming 0 is using VBR, but I have changed it to CBR, but no difference.