Search results

  1. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    My only comment is that MIC IN and LINE IN are only 3.3v when the option "Microphone power " in the camera under "Audio Settings" is checked and saved. Otherwise it is GND.
  2. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    And I'm guessing that pin 14 is probably signal ground, though it may be tied to power ground, I dunno. I'm using pin 14 as GND for the mic. I didn't want to tear it apart and try to follow the traces.
  3. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    Alrighty...so here is what I have determined. 3 - IO Port 4, 4 - IO Port 3, 5 - IO Port 2, 6 - IO Port 1, 7 - 3.3v power, 8 - GND, 9 & 10 are audio output, 11 - mic in, 12 - line in, 13 don't know, seems to float, may not be connected, 14 GND
  4. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    So it looks like pins 11 and 12 are actually the audio input. I was playing around with setting the ports to GND and testing the pins and noticed that pins 11 and 12 no longer had any voltage on them. I set all the ports back to input - floating and they still had no voltage on them. That is...
  5. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    Not an ROV. It is a stationary underwater coral reef project in Cozumel, MX and streams over YouTube. Living Sea Sculpture
  6. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    Looking at the camera and there are 4 configurable ports. They can be configured for input or output and can be left as open circuit or GND. So it looks like I can eliminate 4 more pins by setting these to output and GND and then finding them. So that is 10 of the 14 pins and there is a audio in...
  7. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    11 and 12 are at 3.25 V and 14 is at GND. I am waiting on the connector to be able to test the ones on the top row as I can't reach them with my probes. I'm looking for the Mic in and as long as the pins don't have voltage on them I can hook them to the microphone without worrying about damaging...
  8. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    Thanks for the reply. Can you tell me which 2 pins on the connector the power pins are? That will eliminate two more pins from my searching. I have already identified 2 ground and 2 x 3.3v so with these two that will drop me down to 8 possible pins.
  9. L

    AXIS P55/Q60 Multi-connector cable - pinout?

    Did you ever get or figure out the pin out? I'm trying to connect a microphone to one of these ports. You probably already know but the mating connector is a Molex Mfr. #: 51353-1400 and the pins are Mfr. #: 56134-9100.
Top Bottom