Search results

I have one doing the same thing, been playing with different settings over the last few months with no success.

Hello, I also have a older NVR5208-8P from 2016 and considering updating firmware but recently NVR has been losing password & system info on reboots. I’m thinking maybe the internal system coin battery needs replaced but not sure. Have you replaced your battery? Thanks!

Hey guys, 5.5 yr old NVR running fine until recently username/password resets and camera channels got changed around. Both occurrences happened during NVR resets, first one was weekly maintenance and second was user initiated. Thinking maybe battery low and not keeping system info? This was my...

Hello, I’ve been reading through this thread but haven’t seen anything mentioned about configuring SD card as back up storage. I’m using a new 5216-16p with 6 TB Purple HD from Andy and the interface looks a lot different than my older 5208-8p. I haven’t seen anything related to the SD cards in...

Following

Ok, thanks for the response!

Hey Guys, I just picked up this cam from Andy's Amazon store and having trouble viewing both channels on a NVR5208-8P. I can see both channels listed in my Camera/Remote top box however, it shows channel 1 in port 3 but 2 is 37777. All 8 channels are used, do I need to have a open channel...

Are these similar to the Annke l61 cube? Work with Annke app? Thanks!

I've also had good luck with this crimper tool and connectors!

@EMPIRETECANDY Thanks for the response Andy! I already checked for loose cables when I had camera apart to access reset button but all ok. I think the camera has a problem, please contact me to arrange a replacement.

Thanks for the reply @Terk & @nymphaeles ! Unfortunately, the camera went offline again before we could try the suggestion. Replaced with a another new Starlight 3.6 from @EMPIRETECANDY and problem went away. Reset the problem cam and tried with a different NVR (5208-8P) but same results, device...

Hello All, need a little help with a new install I'm supporting. Ran into a problem with this camera and a 5216-16P NVR. Camera worked initially, then was unplugged to move the location by about 10 feet using the same wire. When hooked everything back up, NVR didn't see the camera at all. *...

Hello All, need a little help with a new install I'm supporting. Ran into a problem with this camera and a 5216-16P NVR. Camera worked initially, then was unplugged to move the location by about 10 feet using the same wire. When we hooked everything back up, NVR didn't see the camera at all. *...

No problem, thanks for the update!

I'm interested if still available. Let me know, thanks.

Ran into a problem trying to upgrade to current firmware from a Jan. 2017 version while logging in to cam thru NVR. Upgrade file just hangs... Transmitting files......please don't leave this page or close the browser.... for over 12 hours now. Not sure if it will eventually time out or? Any...

Ran into a problem trying to upgrade to current firmware from a Jan. 2017 version while logging in to cam thru NVR. Upgrade file just hangs... Transmitting files......please don't leave this page or close the browser.... for nearly 2 hours. Not sure if it will eventually time out or? Any...

Thanks for the response Looney2ns! Yes, I understand the varifocal purpose, was thinking more during install if I could use idmss or dmss apps while on the ladder. I need to try Tinycam Pro again, I played with it for a short time & had trouble finding my Dahua NVR & cams. Already had the...

Hello All, can the varifocal zoom be controlled through the app now? Seems like I recall reading a thread that this was possible with a newer firmware release last year but having trouble finding it now. Thanks!

I noticed that also but mostly only on highest quality setting

I thought I read a thread that mentioned push notifications with gDMSS Plus or IDMSS Plus didn't work with the new firmware, anyone else having issues?

Andy, I updated cam to 2.460.0000.5.R, build date 2017-01-17

Thanks nayr, updated to latest firmware but still no IVS setup thru NVR. Maybe next one...

Any feedback from Andy on no IVS setup through the NVR?

My experience with the Plus apps, both Android & Apple, seems unstable. They work fine sometimes, other times push notifications stop then start again. Can you see other cams thru the Plus app?

Still no success in getting IVS Tripwire to work on this Starlight, confirmed IVS Smart Plan is on. Same as mentioned above, I can add a rule but cannot draw any lines. Also noticed IVS doesn't show up in the storage schedule.

Ok, still trying to get IVS to work on this Starlight since it's not possible through my 5208 NVR. While making some other adjustments with my laptop plugged into a NVR Poe port, I tried to set up IVS Tripwire direct into Starlight without success. I can add the rule but when I try to add the...

I've just run into the same problem, cannot setup IVS on this camera thru my 5208 NVR. Setup went fine on 4 other Dahua cams but I get the " does not support configuration search or modification" on the starlight. I've been messaging Andy about another order but I recently discovered IVS and I...

Curious if you have learned anymore with your testing? I've recently started playing with line crossing with some success on my 5208 but trying to eliminate neighborhood cats from triggering. I drew some boxes in objects but no changes, haven't found any "how to" documentation. Also noticed some...

Yes, seems to be just the iDMSS Plus app issue as the Lite versions signs in fine. I just started using Plus so I could play with push notifications and Android Plus version works ok again. Deleted the iDMSS Plus off my phone with intentions of reinstalling but didn't see it listed in the App...