Search results

  1. I

    SD59230U-HNI only turns on when manually rotated

    Yup, driving me bonkers.
  2. I

    SD59230U-HNI only turns on when manually rotated

    Turning on. As in the camera is off and wont boot when power is applied until I move it, then it turns on and does it's startup sequence.
  3. I

    SD59230U-HNI only turns on when manually rotated

    I have an SD59230U-HNI hat's been in service for years. Recently it started only turning on if I go out and move the turret around some, then it springs to life and boots. Normally I would guess there was a bad slip ring but IIRC it actually used cables. Anyone had a similar bug and solution?
  4. I

    With web interface and SMTP problems, how can I review IVS trips?

    No, I see where that would be possible, but to do that the IVS has to be configured on the NVR not the camera, and as I mentioned in the first post (with image)for whatever reason the smart pss refuses to allow IVS to configured on the NVR. IVS is currently configured directly on the camera.
  5. I

    With web interface and SMTP problems, how can I review IVS trips?

    No one has a good solution for this?
  6. I

    With web interface and SMTP problems, how can I review IVS trips?

    I have a DHI-NVR5432-4ks2 and several IVS cameras (like SD59230U-HNI). Since the web interfaces really don't work now, and gmail is blocking SMTP messages, I have no real way of reviewing IVS trips (or modifying them for that matter.) I use smart pss for viewing in general, but for whatever...
  7. I

    IP based IR break beam sensors?

    Yea I was thinking about just using cat 5 with breakouts for the poe and closures, but I don't think the poe will activate with a breakout? I also haven't figured out how to have a camera alarm input activate a DVR alarm output.
  8. I

    IP based IR break beam sensors?

    Are there any IR break beam sensors that can integrate into a network? I know I can probably hook regular ones up to an alarm input on a camera, but I was hoping someone might make something more plug and play, maybe even poe, but I can't find anything. Same question for pir motion sensors.
  9. I

    SmartPSS saves 1 hour off from selected times?

    It especially annoying since I usually save several camera feeds over the same period, and I have to do it for each, I don't see a way to manually enter the time either just use the slider.
  10. I

    SmartPSS saves 1 hour off from selected times?

    The time on the DVR, smart pss and the cameras is all synced, but whenever I got to clip a period, the time it saves is 1 hour ahead of the time selected, see the link below, starting at 7 makes it save 8, so I have to move the clipping points back one hour to get the right video, which is...
  11. I

    Tripwire repeteadly losing tracking.

    FYI, for anyone that has the same problem. I have "solved" this by having the camera reboot daily immediately following the NVRs daily reboot. I'm not sure if just daily reboots are what fixed it, or specifically being after the NVR. I suspected it could be either intermittent loss after the NVR...
  12. I

    Tripwire "ghosting"

    Gyazo - 9b91b1643638091bde28aa27fa4f9302.gif I've fiddled with every setting I can think of that might make a difference, and these still keep coming up. There's no pattern that I can discern to even begin to pinpoint the cause. Anyone have any ideas?
  13. I

    Tripwire repeteadly losing tracking.

    As I've said, normally it would. When it goes "inactive" it will track nothing, no matter the size contrast speed ETC. It just stops working entirely.
  14. I

    Tripwire repeteadly losing tracking.

    Distance traveled is what was meant, not distance form camera.
  15. I

    Tripwire repeteadly losing tracking.

    Yes, I'm saying I don't believe the PTZ position was the reason, since it was in it's preset position, but not ruling it out entirely. This isn't it, max is largest and min is quite small. Right, it absolutely should have been boxed, and when I know when it's truly active, cars are always...
  16. I

    Tripwire repeteadly losing tracking.

    Car on the way in not detected; Gyazo - e84fd07208f3801d6538aea9d54efd0f.gif Car on the way out detected, I think all I did was re call a preset; https://gyazo.com/4d61a9a64d9acb2342036b952c04def4 The tripwire only works when the cameras on a preset it seems, but all the times it's stopped...
  17. I

    Tripwire repeteadly losing tracking.

    Since I started to try and use tripwire Ive noticed it stops working, by working I mean tracking objects. I have not been able to figure out why yet, at first I thought it was after the NVR went through a reboot, possibly overwriting the cameras setting, but that wasn't it. Right not I'm just...
  18. I

    Increasing motion detection reliability?

    In this screen? or a different one? I could not find it anywhere. Gyazo - b54e98adfaf747231ef933b27ff9fe1a.png
  19. I

    Increasing motion detection reliability?

    I think it might be related to the exposure changing rapidly or the sun coming in and out of clouds or something. and/or the I frame, I've noticed each new I frame is very noticeable, but doesn't look like dahua lets you change that. Yea I was going to do that, but for a different reason. I...
  20. I

    Increasing motion detection reliability?

    I've been trying the IVS out for a while and it seems even less reliable than motion detection. Half the time it doesn't even notice and box out a car driving through (max size is set to max). Other times it decides to box out nothing and trip like this; Gyazo -...
  21. I

    Increasing motion detection reliability?

    Hmm it's a 5432-4KS2, when you put it that way though I'm not sure. I never really noticed that and looking back at the specs, I don't really see a clear definition with any of the NVRs if they support it or not. It is in the configuration options, but not sure that means it supports it. Did...
  22. I

    Increasing motion detection reliability?

    Hmm, how do I get that marked on playback (on the NVR) then? I was thinking using an alarm out, but it doesn't have that option, only relay out. Gyazo - 5916d2a15115c7d2d91ed8e8da4a192c.png
  23. I

    Increasing motion detection reliability?

    SD59230U-HNI is the camera 5432-4KS2 is the NVR. I have motion set through the NVR. I just started messing with setting up tripwire detection though, for some reason I can't set it up through the NVR interface but can through the camera. Is this other peoples experience as well? For motion...
  24. I

    Increasing motion detection reliability?

    I have it set to 100 sensitivity and 25 threshold, and the detection area is bare ground with no branches ETC. Despite that I still get some false alarms. It detects cars which is the aim, but I just hand a herd of deer run straight through the detection zone and it did not set it off. Is...
  25. I

    Which is worse, spiderwebs or moths?

    Gyazo - 106254255bdfc08cbf3e92091206635f.gif Nothing like an invisible thread of silk to totally wreck your motion detection.
  26. I

    Dahua "Local Alarm" input is speed challenged?

    Just had another snapshot dropped, really not acceptable to me. I rely on these :/
  27. I

    Dahua "Local Alarm" input is speed challenged?

    How hard is it to set that up? I looked at that software briefly, but it seems very robust if someone only wanted it for this. Any other recommendations for completing the same function?
  28. I

    Dahua NVR email spam

    Yea looks like you have the same problem as me. I depend on the email snapshots, and this 3 email thing is driving me crazy, along with the sometimes no emailed snapshot. I went to try and set the alarm output on motion to an alarm input to send an email, but the damn thing sends three emails on...
  29. I

    Dahua NVR email spam

    Got my NVR and a couple cameras in. The blackface starlight is great. But I'm having a little trouble with the NVR. It emails at start of motion, then an image, then at stop of motion. No settings to change it seems like, and I tired sending the address directly to spam with an exception for the...
  30. I

    Aliexpress problems

    All my experience with hikvision has been terrible, culminating in the fact that half their equipment cant send smtp through gmail because they are using such an ancient sub protocol (I have no idea what I'm walking about, but the reality is correct) or some crap of ssl.
Top