Search results

Nice script for novice users.

Nope. I’m using VPN on demand, but it still doesn’t work with iDMSS. So if I want to see my cams while I’m away from home I start the app for my smart home first, which the enables the tunnel and the I switch to iDMSS. Still not satisfying.

Yes it does. Have both devices tested together with the actual SIP firmware.

Hola Javier, With the tftp option you should be able to go back with the firmware, if you don’t like it. I already updated mine to the first sip firmware before and went back. Actually I’m on the SIP 2.0 and I’m fine with it. I only could upgrade it with tftp, other ways didn’t work out. For now...

As far as I know it’s only possible with the cameras connected to an NVR. I don’t know any way to trigger one camera from another directly.

Hmm, i didn’t hat any IVS rules for any presets. The PTZ records 24/7, so for me was no reason for that. Events in timeline are caused by the other cams and I can sync playback the channels which might be of interest. Well, maybe I’ll have to reset all and build it again from scratch. But this...

Only a little bit, not completely. Only for better adhesion of the new paint. Not sure if it’s really needed. My first try was to paint it with a brush, which wasn’t really adhesive. I think spray paint is even more adhesive, but it’s always better to have a rough surface. The FritzBox is a...

Yep, they have been painted with RAL7016 (anthracite) spray paint.

Do i understand it Right, you have also IVS in your presets which are set to record and that collides with the triggers? I don’t have any IVS rules in the PTZ, only in the other cams which trigger the PTZ. At the moment I’ve set the PTZ to face detection.

Same with me. After doing any manual movements it goes to its idle position. A neighbor of mine asked me to watch his property with my cam while he was away. So I altered the idle preset number to another. And guess what, if the trigger comes by cam2 to go to preset 1 it resides in that preset...

Looney, does this work for you if your NVR sends a preset to the PTZ, triggered by an event of another cam?

@EMPIRETECANDY anything new from the eastern front? An ANPR cam is still on my wishlist. [emoji38]

Yep

Until my last tests my 23” touchscreen wasn’t supported by the NVR for any input. I use that screen with two inputs, one for the NVR and one for a windows pc with touch. Using SmartPSS there works well with touch, but of course the iPad is the less power consuming solution. It’s also flexible to...

I don’t know where you reside. I live in Europe and used an HDMI Modulator which gives me a 1080p signal with DVB-T. I feed this into my Multiswitch and have the signal at every tv socket. Only a tv with build in receiver and h.264 capability is needed. I know in the USA there is another type of...

Of course you could also beam the video signal from your (hopefully you have one) NVR to your (hopefully you have some) TVs all around in your house. That’s what I’m doing primarily. The iPad is only an addition for the upper hallway, because there’s no tv socket [emoji4]

Or a cheap, used iPad, if you prefer Apple. Only iOS 8 is needed for iDMSS HD. I use an “old” iPad Air 2. But even older ones will work. So you should get a working one for about 100-150 bugs.

So why don’t you use an iPad? This is the way I use it at my home. I also had an alternative with a 23” touchscreen connected to a pc running SmartPSS.

Until it’s tested by a member or confirmed by Dahua, everything is guessing. For my understanding the DSS Pro gives you Software based features for processing on own hardware. With NVR it doesn’t matter if it’s the ITC215 OR ITC237, the processing is done by the cam. The 215 has more AI to...

Is it really new? The ITC237-PU1B-IR is the one I was asking you for [emoji6]

Hopefully it gets same or better technical specifications as the ITC237. I like the possibility to capture plates in 40m distance. The smaller ones only give you 8m.

As far as I’ve tested a normal ITC won’t work with NVR only for ANPR. I think the processing is done in the cam as it’s mentioned in it‘s spec sheet. The NVR only does support the configuration, AI etc. if an ANPR cam is recognized. Like it’s done for IVS if an IVS cam is connected. Hot spot...

Thanks [emoji4] I’m trying to spent more time here, but in a few weeks the next baby boy will rush into my life [emoji2957]

Nice one

Ok, so it seems it’s not only NVR/PTZ related as it works for you.

To be honest, I don’t know if it worked properly for me in the past. Because I had set the idle preset to a position the cam often is in because of the IVS triggers. Now I wanted the cam in an overview position when it’s idle and recognized that it only works if PTZ was manually moved.

I don’t think weigle has problems to find IVS settings in the cam. In the cams UI there is of course no trigger configuration for a PTZ in the IVS settings because the cams don’t know each other, but the NVR knows them and can trigger another cam in the case of an event.

Yep, same to me. Somit seems the NVR does a „strange“ call to the PTZ that it won’t go back to idle position. Or maybe it’s a wanted „feature“ of Dahua to keep the cam in the position it was externally triggered. But in my opinion it should to the idle thing anyway.

Do you also use triggers which are configured for IVS in the NVR? In my case i could agree to your explanation. Same here. Only if the cam was moved to a preset by a trigger from the NVR it doesn’t go back to idle position.