i currently have Virgin Media Modem > USG > POE switch 1 with 2 IP cams and 1 Unifi AP connected > cable running to loft space attached to another POE switch connected to NVR and another unifi AP
where would the USW flex go?
thanks @bigredfish I couldn't get it to work.
A friend has lent me a different Dahua NVR and with that it all works fine.
When I get the energy will go back and see if I can get the old nvr working again.
cheers
drilling it out sounds like i will F*** it up
Going to try impact driver to see if i can get it with brute power ( i sprayed it with lubricant yesterday )
thanks - will spray it with some lube.
I think the person who put this up has cross-threaded it and used an impact driver to jam it in.
thinking i may need to drill it out?
what size drill bit is advised?
then replacing the screw....Is m5 x10mm ok?
I have a Dahua NVR and 2 x 5231 cameras
I upgraded the firmware of one of the cameras last night and now am unable to access the camera via the NVR
I can add the camera via Remote>Remote but the status remains as the Red Cross
Please can someone send me link to better firmware
or let me know...
Hi I have a Dahua NVR and 2 x IPC-HDW5231R
Just got a Unifi USG but have an unmanaged Netgear POE Switch
To improve security is it advisable to create a VLAN and stick the Dahua gear in it?
Any guides on how to do this please?
Or what is the best way to stay safe.
cheers
I have a IPC-HDW5231R-ZE camera mounted on an external side wall of my property.
The camera is mounted over the hole in the wall where the cable exits.
I want to lower the height of the camera as its currently at 10ft high and bringing it down to 6ft high should get better face shots.
The wall...
Selling this Dahua PTZ camera.
No longer needed due to a change of circumstances
Comes complete with Dahua Wall Bracket.( http://pl.dahuasecurity.com/products/pfb305w-13691.html )
£200 plus delivery or collection from London/Herts/Heathrow
thank you
i do have the region defined on the nvr.
only 1 camera has a sd card in - not sure if that should make any difference.
will try the factory reset
I have a NVR DH-NVR5208 with
IPC-HDW5231R-ZE
IPC-HDW5231R-Z
What am I doing wrong? I am not able to record on the NVR any "events". Have set up motion detect event but it does not seem to be recording these. Just the standard 24/7 recordings.
I have previously had this working fine ( when I...