Search results

Hello xywy This camera has firmware which is exactly like R2 cameras. Read the big thread of alastairstevenson where he has devised the unbricking/flashing script v2.

As an update to fellow readers - All cams were upgraded to 5.41.1 success. alastairstevenson method of updating 6332FWD was a success. Another feather in his hat. Thank you. PS - Ofcourse I have HxD, and am able to comment on file differences etc by using that. What I was asking you was...

By any chance can you mod the other mtd6?(I already have modded mtd6 of original mtd6 with mac ending in dd) Or if yoh can tell me which bit to chNge(available on this forum) and which block checksum to maintain. Thanks nitin Ps - writing from phone so referring to other 2 donors mtd6 I had...

Ok - Sequentical upgrade til 5.41.1 is working. Ofcourse I am stopping here. prtHardInfo is still 1. My h264+ in fisheye mode exists and enabled. So, if you are assuming that hikvision is going to enforce more checks on mtd in susequent versions - You are assuming correct, proved with this...

DS-2CD6332FWD-I Not booting Took the experience of this guy (and you are helping him too!) and uploaded 5.0.9 digicap. It worked. Back to where I am now - The start of the thread. I have a fisheye which has 5.0.9 - same as I started BUT with lang =1 # prtHardInfo Start at 2018-03-09 09:54:02...

upgrade /digicap.dav [ INFO][MIN]BURN: File size is 25021733 bytes (24435 KB) [ERROR][MIN]BURN: upgrade_from_digicap:file_nums=37 [ERROR][MIN]BURN: upgrade_from_digicap failed I was able to download mtd5 and mtd6. mtd6 is same as your modded one. So, the camera has not touched it. mtd6 - I...

ok- something happened and camera doesnot boot. I am now in recovery shell. I see that davinci folder is empty. Should it be? What are the steps to tftp digicap back into the minishell? Here is where I am - PC address is 192.0.0.128 Cam is 192.0.0.64 Cam doesnot want to pick anything during...

Downgrading by tftp off course I tried it. Says data back error, and 5 seconds later file transfer completed. I am waiting for 30m now to see if it throws up successful. I believe 5.4.5 is the precursor of things to come. Is it possible that 5.4.5 wrote New mtd? Ps using hikvision tftp Will...

hmm - another bad news on this camera - IVMS now refusing to connect saying language mismatch. So, this camera is a brick now. Any pointers on how to recover? Read your detailed guide on brickfixv2. You have put some magic sauce in digicap which is brickfixv2. So, any chance you can make...

Tried to downgrade using IVMS - says language mismatch. Hikvision as usual is putting in more effort in making sure we dont upgrade and Chinese Govt access to our homes remain intact. Well, 5.41 is what I would like to have. I havent lost any functionality though - other than web access (use it...

What exactly is this trap? And I think Hikvision is now checking the other copies(balance 2 copies of mtd6) in 5.4.5 onwards? And, I did gain H264+ in another mode - Fisheye only. Worth the compression (tradeoff on quality)

Curiosity got the cat!! i upgraded to 5.4.5, to language mismatch error!! ivms work though. The language flag is 2 now in prtHardInfo

Success- Upgraded to 5.41 (via 5.3 interim) I didnot gain H265 :( But overall compression/quality has improved. Thank you alastairstevenson Will try to upgrade the balance camera(can you tell me which block crc is to be maintained in mtd5). Now off to the second project 2CD-3942F which is...

Attached is the mtdro(I zipped the whole foder - so it has your modified files too)

Ok - As the camera is now fully operational, the procedure to update is - If you need to update from 5.0.9 to 5.3.5, you need to update "digicap_eng_std.dav" first, then update the firmware 5.3.5. So, any gotchas before?

Thank you - The camera came up with different MAC. Though a little bit surprised, you change e3 to e4 in the 3rd byte - Wouldnt it change the manufacturer? edit - e3 is still hikvision. Serial was not changed (in all 3 places?). I think I have a side effect(and for you to study) Fisheye...

Hmm - after my snafu - I have a potential trouble now. Since I dont have the original mtd6 of this camera, I cannot put this cam on network now. I have two more of these - and file compare of the mtd6 of these give 24 difference. Basically they are 8, but repeat 3 times. Of these 8, 3 are...

Yes - You caught my dumb moment. I checked it BEFORE I read your comment - effectively - i was cursing myself when this thought came into my head. This thought was triggered when I applied the mod_1, and still the cam came up with the same MAC. Yes - The camera from which I picked up the mtd6ro...

My moment of ... wait - cannot say that because who would have thought - The modified mtd created a mac address which is exactly same to another of my 6332 on the network!!! This is one in a million rarity? Found this out (that too by chance) after connecting the camera to power brick and...

Ok - reading this - Acquired a 'bricked' DS-2CD6362F-IVS I will be ordering the serial cable now. Since I am in Dubai- It will take a while.

Ok - connected through single switch. Get one ping after some time(on 192.0.0.64) from 192.0.0.128. Did the following steps- Downloaded old firmware from this link (downloaded 5.0.9 baseline) DOWNLOAD PORTAL Downloaded the hikvision ftp, disabled the firewall etc. Still nothing - It doesnot...

Ok - Its not showing up in 192.0.0.0 or 192.168.1.0 or sadp. Not even brief pings. Any other idea to unbrick?

Unfortunately, it didnot work. The camera didnot come up after copying the file into mtd (the mtd6). Will check if it shows up using 192.0.0.128

Hmm - The camera is already english. I believe this camera was made english by the seller using CBX hacks. The long script (var....) spells out chinese. prtHardInfo spells out flag 2. Also by the way - This camera has ambarella chipset - making it closer(similar) to raptors? Before I go and...

Ok - to update - mtd5 seems the same as 2xx2. mtd6 has some changes - But again the language flags seems at the same place. How to check? Thanks

Wow - What a trick - I thought I needed to create file structure (not format- but directories) before the cam could access. I just found it mounted in nfs00! Here is the mtd6.Thanks Nitin PS - Had to put dummy zip ext to upload.

Ok - To update - There is no way I can take the copied file (so far) I tried - 1. tftp (there is no tftp client in the shell so it doesnot work). I was able to do this though -cat /dev/mtd6ro > mtd6ro 2. NFS or CIFS share I tried smb1 (by disabling smb2/3 as per google), but the share found...

Hello Yes- tftp is enabled. This is how I am getting the details(and mucking around) This seems to be the same type of camera. There is davinci in the directory etc. How do I copy mtd0? In dev directory I see (below) # cd dev # ls amb_gadget mtd0ro mtd8ro spidev0.1 tty30...

Here you go (Sorry I have no idea what this means- mtd etc) # cat /proc/mtd dev: size erasesize name mtd0: 00020000 00020000 "bst" mtd1: 00100000 00020000 "ptb" mtd2: 00100000 00020000 "bld" mtd3: 00100000 00020000 "hal" mtd4: 00100000 00020000 "ano_ptb" mtd5: 00080000 00020000 "env"...

Hello I have few of the above fisheye cams. They were all bought from China, so have CCCH in the serial number. All of them have hacked firmware with english GUI. Here is the info- Firmware Version V5.0.9 build 141009 Encoding Version V4.0 build 141027 Now, looking at the firmware on Hikvision...