It looks like after the BI app update it's working, but for my purpose it's not quick enough.
I've set the radius to 100m, but don't get the notication until 3-5 mins later, I wanted to be able to trigger an event before I arrive home.
Hi all,
I've configured geofencing, and a push notification whenever I enter/exit the area. This works well if I leave the BI app open.
However when the app is in the background it doesn't trigger the geofence change, until I open the app again.
I've configured the app so;
location is always...
Hello,
I have a camera at the front door which I'd like to configure in such a way that ...
Motion from anywhere the zone (entire image/frame) will trigger a recording
Trigger a push notification only when an person (using AI) crosses from zone B>C
Just trying to work out the best way to do...
Seems to be working now, I just copied the DLL to the same directory as the executable.
The playback is scratchy, is this normal or should the playback be smooth and uninterrupted?
Cheers
Howdy, I had a similar experience, the audio from mic to camera to terrible. I tried this a while ago, maybe its improved with newer BI versions, I'll have to try the latest.
Can you share the screenshots of your camera settings?
I did some investigation into how audio can be sent to these hik...
Hello,
I've been using a schedule to switch between the different image profiles in v5.5 of the firmware, its working well.
However on a similar camera running 5.6, it appears they've changed something, and the way you schedule the switch is different.
In 5.6 the period start & end times don't...
Hello, I'm upgrading an old NVR, some of the cameras were connected directly and some via IP. I plan on plugging all these cameras directly into the new NVR, do I need to reset any of the cameras or passwords etc so they're easily added to the new system?
Cheers
I'd have thought it would still connect, but come up with a stream error if the resolution was too high.
I did manage to use the RTSP feed directly and add that to the NVR, but doing it this way you can't set motion triggers. The NVR was able to pull the Main stream /Streaming/Channels/101 when...
Hi all,
I'm helping someone who has the NVR DS-7608NI-SE/P, I've added a new camera DS-2CD2365G1-I to the system for them, the camera works fine stand alone from the browser, but its always showing as OFFLINE in the NVR camera management. I've tried using both HIKVISION and ONVIF protocol, but...
Hi all,
I have a Hikvision camera DS-2CD2386G2-ISU/SL which has 2-way audio, using their HIK app 2-way works great!
However, Is it possible to get 2-way audio working with the BI app? Currently I can only hear what the camera microphone picks up, I'm not able to talk back.
Thanks!
And thats what I did, but BI doesn't seem to be starting it? Does it open the deepstack GUI when BI starts it?
The only difference is I can't use the default port 82, so changed it to 84, but no luck.
Running DeepStack manually on port 84 is fine.
Hi All,
Using the latest version of BI, I've downloaded and installed DeepStack to C:\DeepStack, I'm able to run Deepstack.exe manually and see the application running and accessible on the port I set "84".
I've set PI to use local IP and the specific port, click on start server, BI now shows...
Just thought I'd post an update, the new PC is leaps so much better with BI, CPU Usage on my old system without quicksync was approx 70%, down to 7%~8% now, so very happy!
Hi,
Looking at upgrading my BI PC, and would like to ensure it's intel quick sync compatible for hardware encoding. The CPU ( i7-10700) says its supported, but the motherboard (Gigabyte H470 HD3) doesn't specifically mention it, it does have onboard Intel Graphics (Intel® UHD Graphics 630)...
Hi, it looks like the setting for "Mertic/Celcius" won't stick between restarts. If I change it in the app it remains and works as expected, however once the app is restarted I need to manually go and click the "Metric" option.
Thanks