Search results

I think I will reach out to IMOU and see if they can provide any info... I suspect it could be corrected in the firmware but I also know they would prefer their cameras to be used via cloud and their app... Here is what happens in my case, I have ONVIF device manager and SmartPSS side by side...

You can find it here, after selecting your camera in the list of cameras on the left - you need to provide your login credentials to the camera(s): It's the option you see in red "Video Streaming": Once you click on that a window will show the stream and some parameters at the bottom: The...

For me, I have even tried removing the camera from BI and after connecting back with SmartPSS the following day (despite no reboot) the frame rate and iframes have still reverted. But only for the main stream. The change occurs in the camera itself, BI only receives the stream it sends... I...

I had already set it like that using SmartPSS, but I just checked again to make sure, and it is set to never Auto Restart. I have a suspicion the frame rate and iframes reset when the camera switches on the IR. I have my profile set to "regular". I will dig into the profiles a bit and see if...

Sure @wepee So, for the IMOU Rex-3D (3MP), the network IP camera configuration in BI looks like this - it seems to work fine selecting Ranger 2C RTSP (except for the framerate / iframes caveat but that is not a BlueIris issue, it would seem more related to the firmware/configuration of the...

I haven't seen this camera model mentioned previously, so I thought I'd share. IMOU Rex-3D (3MP) - works with BI (bidirectional sound, ptz and settings, with a few caveats) How I added the camera to BI: Connected camera to power and LAN Used Dahua config tool to locate, initialize the camera...

Yes, right now in Spain they can be bought for around 85€... as overview cameras I find they are ok

Maybe a better idea. I only start ngrok when I am away and need to access (a bit of a convoluted way, but it works for me: I use Alexa on my phone to run a home automation event in Homeseer which starts ngrok), and usually stop if afterwards for security concerns... I have never tried running it...

You could also use a solution like ngrok... I have it installed on one of the servers in my LAN and start it when I need to access remotely...

Thank you! I will continue to observe and see if it behaves...

After reading a few threads on recommended settings for day/night on Dahua cameras, I configured a couple of IPC-HFW2431S-S-S2 as follows: Day - 0~4ms gain 0-30 Night - 0~8.3ms gain 0-50 I've been observing the stream in BI during the day and night, as well as recorded video, and it would seem...

Kind of programmed obsolescence I guess, to avoid claims when they break... having said that, I am a photographer and I would have a right go at Nikon if my camera stopped working when the shutter reached the 200k cycles it's rated for... it just goes on until it eventually fails, often a whole...

That's very good to hear! I read somewhere else that leaving a PTZ on touring presets like that may cause premature wear & tear, but your case seems to prove it may not always be the case. Probably will also be a function of how well the PTZ mechanisms are built.

Very nice @TRLcam !! - I just had a look on the youtube channel. Do you have the camera on a patrol routine moving around all the time? How long has it been going for?

Looking forward to pics/clips!!!

Just in case it's of any use, I have some older cameras, that will only open the GUI on Internet Explorer. After a lot of digging around, I found that this registry key, set this way, will allow IE to work on Windows 10...

Oh, thanks! I will look into that for sure. Sounds cool

Just read a few more posts on the forum and it seems rain-x or similar products may have an adverse effect on the camera lens cover... I think I will investigate a little further

Maybe worth a try... I will probably try something like that on the more accessible cameras before even starting with the roof :)

I was actually thinking of something so the water doesn't "stick" so to speak to the lens cover, not so much for the purpose of viewing during rain, but because of the dirt that's left over when it dries... recently we've had lots of storms carrying sand/dirt and the view from the camera goes...

I have an additional thing to deal with here... even the tiniest hole / gap anywhere, insects nest in... I have had cameras where the screw holes were completely sealed up with mud and the likes... outdoor maintenance of any equipment is non-stop... I wonder if one of those sprays for...

Yes... my routine for outdoor cameras includes going round and wiping them after it rains sand/dirt... this is one of the things that was putting me off for roof top cameras...

Just had a look at it, it's definitely nice! I need to figure out a total budget for this, including cameras, pole extension, extra POE switch, cable runs, junction boxes etc. If/when I get it done I will also share the setup and some pics

I'm glad I'm not the only one entertaining the idea... ;) Thanks for the turret mount form factor suggestion. Is there any particular 180 brand/model you were looking at? If you ever get round to setting that many up, I'd love to see what it looks like I would be happy with even 4 separate...

In BI, under camera -> schedule -> events schedule -> you can add events that are scheduled and/or based on sunrise / sunset and the functions include both reset and restart... I think at one time I had it enabled for some old Foscam cameras that misbehaved when changing from night to day at...

I live in a rural area, around 3,500ft elevation, mountainy region. Weather can change very rapidly, winds can be high (so it can rain and snow almost horizontally at times...) I was considering installing camera(s) on the roof, taking advantage of a TV/weather station mast I already have up...

I just came across this post as I was looking for something else. I live in a mountain area and get lots of thunderstorms... I have three outdoor spots where a sealed junction box houses a POE switch, and the lightning was frying ports all the time, used to buy a switch every few months. The...

It's working!!!! v2.2.4 Only tiny issue I can see is BI thinks it is on a different version of CP AI but who cares!!!

I'm trying to download it now, it's painfully slow for some reason. I will update here as soon as I check if it works

a PTP radio link with Ubiquiti, if setup properly, will work really well. I have 3 such links to cover areas of my garden where I have cameras located and where I do not care to reach with a long ethernet cable. For short distances, the cheaper units will do fine, I have three 4-5mp cameras on...