Search results

Ok, many thanks for your help.

Ive got all three online in BI but cannot access cam 3 through the browser to access cam gui. Not sure whether to quit while I'm ahead or as you say factory reset. How do I do that incidently

Thanks, the last cam (3) which is not online I can't access the cam gui as it rejects both pass words I've tried in the config page you highlighted but no luck

Thanks, strange thing, when I opened BI, cam 1 was online. Checked its password setting and it displays old password. Then changed pass word in cam2 and 3 . Cam 2 came online but not cam 3. Not sure if I have been hacked cos very strange what is happening

When adjusting the time banner I went into each camera via a web browser ( pale moon) then into the settings which were the cameras settings. The password was also modified in the camera settings. Since I cannot access the cameras via the web browser now as they reject the password I cannot get...

The crazy thing is the gDMSS dahua android software on my phone logs me into the cameras okay with the modified password but blue iris wont

1) Yes, the time overlay at the top right of the camera image. 2) Initially just cam 1 was affected reverting ti the year 2000. After I changed the passwords they were going 0ne hour forwards on one of the cams and 1 hour back on the other while one stayed correct. 3) Viewing the cams in blue...

I noticed that the top timing banner on one of my dahau cameras kept changing every couple of weeks. I decided to change the password and duly modified it in my 3 cameras. This was okay for awhile but then I noticed all the time banners were changing on a regular basis. I went to change the...

is that ipconfig from command prompt, done that, no info from that. Ive got the old router but cant connect to find out old configurations. Tech junkie, Would disconnecting the switch from the router power down the cameras ? I set these cams up 5 years ago, so not sure how to configure router...

Dahua HDW5231R-Z

Its quite a few years since I originally set them up. I think you are right they have probably been assigned new addresses, but how to find now there is no signal. The router is a ZTE MF286D, ive been into that for connected devices but not much help for a laymen. cables seem okay. I think I did...

yes, everything else works, I get message 'No Signal' Error 8000274c

yes, I have a seperate computer running only blue iris and is cable connected to the router

I know this will probably be something simple but have just upgraded to another hub ( three sim broadband uk) but now have no signal to my cams. Presumably the ip address has changed. Been into the router settings and the old ip addresses are there without any label. Anyone help? Running Blue Iris 4

Yep, done that thanks

Ok, have made the changes. Many thanks for the advice and info.

There

I haven't altered any settings in Blue Iris. The new folder is set to 40gb before transferral and this has always been fine. But at the mo there is 93gb in the new folder so apparently the software is not shifting the files to the stored folder on D drive. There is space in the stored folder...

Hi On Blue Iris 4 The new clips folder on the C drive has stopped moving its clips at the preset level ( 40gb) to the stored folder on my D drive resulting in the C drive filling up with clips and crashing Blue Iris. Any ideas ? Thanks

Yep, I know that syndrome. Definitely using new address cos it stayed in the browser. Funny, had given up and happened to put in the address on my phone and the Huawei page popped up, wasn’t expecting that. Alls well that ends well, Thanks again :)

Crazy After many, many attempts to login using new lan it’s finally logged in. Many thanks for your assistance.

1. Main Computer: 192.168.1.6 Blue Iris. Comp: 192.168.1.3 2 Gateway on both: 192.168.1.1 Original Router IP’s. 192.168.8.***

If I cannot access my router my plan would be to access my cameras and change their ip,s to be within range of new routers original lan then factory reset the router ( huawei b535-33ea) . Would that work?

Subnet was the same All IP’s. static. Do you mean ip’s of cameras. cables are connected as you state

I carried out your suggestion and the cameras are discoverable. The problem I have now is I can't login to my router.

3 Cameras are now plugged into switch which is connected to new router. There are 3 connections showing in router as IP6 connections with mac addresses but no IP4 addresses so where do I go from here. Have done an ip scan with a piece of software but they don't show there.

the cameras were on 192.168.1.*** IP now on PC 192.168.8.1

I've swapped about the connections on the switch and the camera connections are now alight (solid) but no show in the router as connections

Hello Everyone. Just changed my ISP to a mobile broadband provider. Plugged in all the relevant ethernet plugs into my new mobile router (huawei) and my network switch but nothing works except connection to the internet. None of the camera connection lights on the netgear 8 port switch are...

Thanks everyone for input