Search results

I will be viewing 6-7 cameras in total. Yes plan is to have it near the entrance.

can i use this VTO with VTH1660CH?

Guys can anyone help on getting the latest sip version working between VTO and VTH please. So let me explain my setup, i have a VTO2000a and VTH1660, i upgraded both of them to the latest SIP versions. I did a factory default on both, setup new password on VTO and all good. On the VTH under...

I managed to get it working with non sip version but its on version 3. I am hoping to use the features on V4 regards to disabling voice commands. Is it possible i need to update MCU or something to get the sip versions working?

hello, Just to confirm does SIP version of VTO and SIP version of VTH connect and work with each other? I have upgraded to latest versions but struggling getting VTO to ring the VTH. VTH can see it but it is not fully connected. VTO is on...

Actually I have a hdmi over Ethernet kit which I setup a while back to my main tv, maybe cheaper to just use that and run Ethernet cable

Hello I have the Dahua NVR and have always used phone or pc to view videos etc. I am thinking of installing a TV at the front near door. My NVR is setup in the loft, is it just a case of getting a long HDMI lead to cover the length? Thanks

I also need to install two more cameras, which is now the recommended version similar to this with good night vision

Hello, i am confused which is latest version for this camera? I am currently on v 2.622 thanks

Hey just checking did you ever get this working i got same issue trying vpn on demand?

I only wish this camera were a further out so that I could angle right across as got an issue where although you can see when someone press the bell, my door is a bit further right and not able to see them.

Hmmm possibly as I have always used internal switch and I believe it might have allocated that IP earlier. Makes sense now if you seen that before with other NVRs Thanks

Hello, I am using the Dahua NVR POE version and using the internal built in IP address for the cameras. I am seeing a weird issue but not able to see why this keeps happening. I am seeing below firewall logs every 10 seconds and cant figure out why the NVR local switch would be trying this...

Fully understand on it being a different sensor but my experience with Dahua been excellent maybe because i had the starlight camera and thought night vision on this would be good too. I agree they are different sensor and altogether a different product and not aimed at being a CCTV Cam but...

Agreed starlight are on different level but was hoping it would get close at least on performance

Factory reset only the VTH will work as I had similar issues for long time and realised had to factory default. Go to settings long press one on VTH and it’s on page where we setup VTO settings called default

Does anyone else get loads of noise on the night vision when gain is only up to 40%? I am very disappoint with the night vision on this and expected something similar to my starlight cams. Thanks

Hello I did few times, put both to factory default after every upgrade

Ok all working now, had to factory default after upgrade doh!!!

Hi Guys, Just wondering is anyone else using VTH1660CH instead of VTH1550CH as it comes with an embedded 8GB storage. Rather than using FTP on VT02000a just wondering if there would be a way to use this 8GB in VTH. At the moment i am only getting video when people leave a message if i am out...

issue fixed had to use sip version as that is what i had before.

hi guys again i am not sure what could be wrong i flashing all the .img files but still got issues not, what is the run command for sign.img?

hello can i recover VTH1550CH with this? i seem to have bricked whilst trying to flash firmware, it seems to ping for some time then drops and cycle continues. its pings on the IP i had assigned before.

issue is now resolved going through the dahua recovery thread.

Hi @catcamstar I have a strange issue and just wondering whether you seeing the same, if not if you or anyone got any ideas? I installed my monitor, door bell today and got it working so when someone does press the bell i get a live video on monitor and can also talk. But for someone reason i...

hi @edw Hi @Edwin3 Can you please share your images again with the working sip server please. - don't worry got the sip versions working now. Thanks

Thanks mate :)

thanks wanted to make sure...

Hi Guys Just checking how people have adjusted the camera angle on this. I can see the adjustment which is at the back but it is very hard to move. Does it require any special tools? Thanks

i thought i had solved it but NOT. its a hit and miss regards to No 2. I used the IP address and password which we login to the panel. It does connect to it but blank screen which confirms there is connection of some sort.