Search results

It's the latest revision of the RCA Security branded app.

So I was doing some thinking regarding questions several folks have asked regarding intercepting the doorbell button being pressed so something else can be triggered and I have a theory that it might be possible to do this. Given that all communication regarding the doorbell button is done via...

Confirmed! The IR lights are off and the picture quality is great. We have an overhead light above our door that provides all the illumination we need. So in summary: 1) Remove the 4 screws to release the back cover. There will be a piece of heat sink compound that may detach itself. Be sure...

Both jumpers, as it looks like there are two IR leds in the ring around the dome of the camera. No changelog that I saw, just noticed that the UI had changed substantially from when I last loaded the app a few months back.

*Possible IR solution* So I took my RCA branded doorbell apart today to clean the inside of the dome lens and while I was in there I discovered two connectors that I believe are for the IR LEDs (see attached image). By disconnecting these two wire pairs, that should eliminate the IR ever coming...

I have seen this suggested elsewhere and it may be the route I try if my next round of experiments fails. Could you point me in the direction of a suitable relay to accomplish this task? I must admit to being totally green when it comes to this side of electrical devices.

Here you go! It doesn't miss it by much but just enough so you can screw the lower screw into the wall without interfering with the wedge. I currently have one installed but will probably pop another one on there soon. I am still fighting to make this work with my nutone doorbell unfortunately...

So it does work, albeit the wedge (and consequently the Ring doorbell) is a tad shorter than this one. What I ended up doing is using the screw hole at the top of the top of the wedge lined up with the top screw mount on the doorbell and the original hardware. The bottom screw goes straight...

A previous post in this thread indicated that this one (originally designed for the ring) works with this camera. I have the same issue and ordered it, will be fitting this weekend: https://www.amazon.com/gp/product/B075WNZT8P/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Thanks fellas. So the transformer I replaced it with was 24V (not multi-voltage unfortunately). The user manual for the Nutone does state to use a 16V 15w doorchime for best results (I believe the one I ripped out was around those specs but was too weak to even power the wifi doorbell). With...

Hey there! New to the forums and this thread which has been an incredible source of information for these doorbells so thank you in advance to everyone who has contributed so far! I purchased the RCA version of this doorbell and have it wired in concert with an old school 1980s vintage Nutone...