Search results

One last option. I have another camera (same model) still in service, would you be able to run me through the steps/process of copying all OS and firmware from the good one and placing it on the corrupt one? I can create a NFS share or use the on board SD slot to copy the data to. As well...

I have a copy of mImage_r06 that someone sent to me a while ago but It Is also keeping me from being able to update it. HKVS # upf ***** UPDATE START ***** MAC: 94:e1:ac:6e:87:77 TFTP from server 192.168.2.18; our IP address is 192.168.2.109 Filename: 'mImage_r6' Load address: 0x00207F00...

Yup, for some reason I cannot changed the bootargs HKVS # setenv bootargs console=ttyS0 init=/bin/sh single Type 'help setenv' for help If you know of anyway to change that please let me know! Thanks

However, if I could get a copy of what you’ve got perhaps I can get the camera to work.. would you be able to send it to me or post a link for it? thanks.

Hey, It's not that it's corrupt but for some reason I cannot change the "bootargs"! HKVS # printenv ipaddr=192.168.2.109 serverip=192.168.2.18 gatewayip=0.0.0.0 netmask=255.255.255.0 ethaddr=94:e1:ac:6e:87:77 loadaddr=0x00208000 bootfile=hImage bootcmd=null bootargs=console=ttyS0 bootdelay=4...

Hey, I’m looking for A copy of U-boot_r6.bin. I’ve got a DS-2CD2145 that is corrupt and I’m hoping that this will fix my problems! Thanks.

Hey I have tried to see if your suggestion would change the values in bootargs, but with no avail. KVS # setenv dbg 9 single HKVS # printenv ipaddr=192.168.2.109 serverip=192.168.2.18 gatewayip=0.0.0.0 netmask=255.255.255.0 ethaddr=94:e1:ac:6e:87:77 loadaddr=0x00208000 bootfile=hImage...

[Hey Here is the variables from 'printenv' command. HKVS # printenv ipaddr=192.168.2.109 serverip=192.168.2.18 gatewayip=0.0.0.0 netmask=255.255.255.0 ethaddr=94:e1:ac:6e:87:77 loadaddr=0x00208000 bootfile=hImage bootcmd=null bootargs=console=ttyS0 bootdelay=4 dbg=0 I am still...

Hey Sorry for that, I ran it twice before but I noticed putty didn't create a log file for me to use! he following is a very long post, wanted to make sure you had/got all the info just in case. HKVS # printenv ipaddr=192.168.2.109 serverip=192.168.2.18 gatewayip=0.0.0.0...

Hey Sorry for taking so long to get back to you, summer time is a busy time for me! I do have a NFS share on my home network that I can mount if/when I can get to a root command-line. I tried to change the 'bootargs' and it won't let me. HKVS # printenv ipaddr=192.168.2.109...

Hey, I've tried to do the "update" command but I get HKVS # update 'update' is a ambiguous command! Exec the shortest command Segmentation fault update digicap.dav HKVS # update digicap.dav 'update' is a ambiguous command! Exec the shortest command Segmentation fault It's been a...

Hey; Unfortunately No it did not work. The mImage_R6 does download to the camera however it won't load. I get a "version2 error". If I reboot and let it autoboot I end up at the busybox prompt! Any suggestions? HKVS # upf ***** UPDATE START ***** MAC: 94:e1:ac:6e:87:77 TFTP from server...

Awesome! Thank You!! I have purchased another camera, for a different location, could you give me step by step instruction on how to copy/download a complete copy of all the flash partitions from the new camera? Its the exact same model as my broken one. Thanks, Nick

Hey, The camera is not accessible through the internet, I hadn't gotten that far in the setup. I have download the software and firmware (Hikvision TFTP) however the program is looking for 'mImage_r6' and not digicap.dav. I have attached the log files for both tftp and putty. I'm assuming...

Hey; I've read a number of threads from this site, figured out how to access the camera via serial connection and verified that it was stuck in a boot loop. The camera was installed and powered up for atleast 2 weeks. The iVMS-4500 would not connect to the camera, nor could I access...