Search results

I purchased a new Hikvision Cam to add to my 3-4 year old system. ColorVU DS-2CD1347G2-LUF My NVR is an old discontinued Hikvision PCNVR software. IVMS-4200 My other working Cameras are DS-2CD1143G0-I The camera add in, but I can't get an image on it. When I use batch config tool and install...

thank you, my father had a camera system installed using Dahua N42BJ62 it's a nice cam with Audio, I was thinking about changing over one of my hiks at the front door, and hoping i can use the Dahua, I like the audio feature.

DO you think this will be the future of their doorbell cam too? I was about to buy the doorbell cam, it's only on WIfi. there is not cat6 option for it.

I have Hik setup, I may add a few cams to my system. I use HIK PCNVR (old discontinued), if I buy a different brand of camera that is ONIVF compatible can I expect this camera to work with a Hikvision recording setup whether it be the PCNVR software or a hikvision NVR.

I've setup several Hikvision systems, now I need to setup my parents who are elder and who have a summer home too far for me to install. I wanted to get the a 4-5 cam system + doorbell cam, NVR etc. I wanted an ONIVF system so they dont' have monthly fees, but regarding the doorbell cam I'm...

1stly did you set you computer ip to 192.0.0.128? if not it simply will not work, also i use a switch to do this not a router. A switch wont' try to assign it an IP address a router will and the router may assign it an ip address which won't work, A router can act like a switch if you turn off...

What type of help do you require, have you successfully completed any upgrades? or is this the 1st time? where you able to get the digicap.dev file (mini system) into the camera using the TFTPserver?

Thanks for the files!! I gave them a test with this, but for some reason this cam just doesn't like them , I think I'm going to toss this cam , i tried everything I can think of As for the bullet cams if I can't ping them or see them on SADP or update FW in tftpserver is there anything else...

Thank You, I put my files here the originals as well as my mod files, no matter what I do after reboot the cam will not display in sadp, if I put the mini system back i can putty back into the cam, and try again but nothing I do works, I've dome many of these so It's not a issue with...

I see you have got your cam working do you have the original mod files still I would like to try them in my device that I can't get working, I think I messed up the originals. IGNORE below... Where you able to restore the cam? I have one like yours that i can't get going, I can get the mini...

Sorry for the terrible explanation I have the "wires" I am talking about are the JST ZH connectors 4 wires I soldered the FTDI232 to these wires but only used 3 of the 4 wires

i ordered a ftdi232 and the wires that fit into the hik camera board (not sure the model #) they had 4 wires although I didn't connect one I soldered these to the FTDI232 and the FTDI232 is connected to the PC via usb mini cable. using win 7 all drivers for the FTDI232 were installed and it...

I have 4 stubborn cams that got hard bricked during the process, on I can upload the brick fix tool, but when I try to mod the files the cam takes all the files yet will not show up on SADP it's a ds-2cd232f-is if anyone has this cam could they share with me the original MOD files that were...

Thank you!!! I'll try this week, Hopefully I can resurrect 2-3 of these.

i got all my parts to Jtag the cams, but I'm I can't locate any guides or instruction how to do so, would you have any links that you can share to get me started? Thanks

interesting, I'll give it a try, what I really should do is check the permission of the system make sure the cam is accepting the write, if it doesn't then I'll change it try to write it again, then I'll try to download the mod, Verify it is modded in the cam then up the Firmware. I'll play...

yes thats what I expected too I've modded this cam so many times, yet everytime i try and I extract the mtd6 files, I need to change the language to 01I wonder if I use Chinese FW I can get this going? if I could find it I would try, I wonder if I use batch config on a chinese menu camera if It...

Thanks for looking into this, Not sure how I made these mistakes I did over 15 of them, maybe files got mixed up. I ran the brick fix again, got the mini system into the cam. Then I extracted the cam data using putty, moved all these files extracted to a new backup folder, I took the mod...

thank you here is the mod i did on the file, I sent you the original yesterday/ for cam my cam dev type I have1E98 (i put in 1E) I'm going to order tho tools from Ebay would hate to toss our working cams over s fw issue. "if I wrote the mini system then extract the mtd files again would the...

I included the files from the one cam I can at least get into and write the minisystem to . Here si the files I extract from it. If during the testing with this i wrote other cam's mtd files to it, if I wrote the mini system then extract the mtd files again would the mtd files extracted be...

When upgrading my cam I bricked it, bricked it hard no mini system (even with the brick fix tool) can't upload FW with the hikvision tool. Nothing in SADP when I connect it I can ping 192.0.0.64 Two times then stops, it won't take the upgrade. it this trash or can I jtag it? I have 3 cams that...

sorry I'm not using the correct terminology when run the checksum 16 on the highlighted values I end up with 4 digits in 2 pairs the 2nd 2 pairs I inserted into 04 and I took the 1st pair and inserted into 05, probably not the best way to explain it but I did alter 05 after I was unable to get...

I also modded one more value, with the checksum 16, you get 4 values I took the last 2 values and put it in 04 and I also took the 1st 2 values and modded 05 (in the youtube example this matched while mine didn't ) So I altered it, without saving the backup files. Not I'm assuming this is why...

One of my cams won't come back, I can get the mini system in it, but after modding it and putting the new FW it wont' show up in SADP. I've tried so many different things but I'm at the piont where I'm assuming i messed up the original mtd files and I don't have the un modded originals anymore...

Did a bunch of Cams to day and dismounted the problem one on the roof. The one on the roof is strange, plugged it in via power adapter port lights up, camera lights power up, but no sadp detection and therefore it will not take the mini system. another strange one and I can't figure out takes...

Thank you for the detailed reply, I got a few cams upgraded today in-situ I have about 10 more tomorrow, I had one problem with a cam, strange was it took the minisystem then I rebooted and i saw it in sadp, i rebooted it again and rom there it was gone nothing on sadp anymore, I rebooted the...

My cams are all in place using POE as power. When I power cycle the cam, in the past I dismounted it and powered it with an AC adapter. it was easy because they were beside my. From my understanding this wasn't to be done over POE. If I do it insitu is it the exact same procedure except I...

Yes they are RO cameras. I've gone through many pages of the Brickfixv2 propcedure but I didn't see the in-situ method do you have a link for this? (sorry) and thanks for the advice.

I purchased about 8 DS-2CD1143G0-I about 6 months ago, I could never log in via browser and I could only use the batch config tool to set them up. now 6 months later I was wondering if there is a FW upgrade for them, I see the model DS-2CD2143G0-I but no DS-2CD1143G0-I I can't really see...

I have about 15 mounted Hik Cams from China located in NA that I want to upgrade. I took a few down and did the upgrade using the brick fix method, THANKS!!! it worked but it wasn't an easy procedure as I had to dismount them brick them then run the fix on them. I noticed there is a tool...