Search results

aha...Gotcha! Good to know @pozzello :thumb:

Had tried upgrading with a fresh Lorex (now FLIR) camera as well that I had and the firmware had failed on that too. Its odd. I'll double check on the final camera just in case. Tks Edit: The IPC-HDW1320S-V2 you've referenced is a dome camera (the cameras I have are bullet camera and most...

This firmware in question wouldn't work through the web UI upgrade tool so I doubt it was ever intended for the LNB3163B. My cameras are now listed as PB133E. Thanksfully wasn't all in vein because I still needed to use serial and TFTP to install it. Plenty of head scratching over the past few...

Finally a breakthrough @pozzello ... so I had been using firmware 2.420 of the FLIR/Lorex for my LNB3163B. I had tried upgrading to 2.622 before using FLIR_IPC-HFW1XXX-Alps_Eng_NP_V2.622.00FL000.12.R.180628.bin but it had failed. Fundamentally (when I really thought about it), all that was...

I understand what you mean and I agree on the PAL/NTSC thing. I agree, somethings just not 'sticking'. I thought i'd made a breakthrough by changing the values in "System->General" so it would help things stick... and although it seemed to be longer (caus it does stick for a good few seconds)...

Thanks @pozzello ... did another "Factory Default" there (had to change password, accept license etc) but still no NTSC option :-( Also did one from the command line via serial. Will keep searching for alternative firmware... Thanks again ;)

Gotcha... that would make sense. Main reason for changeover is the Lorex firmware wouldn't work on synology surveillance station (but the Dahua would... minus the current resolution/fps issues)! Would you believe, I can only select PAL (no NTSC on the dropdown for some reason?)

Thanks @pozzello ... here is the output from the URL you suggested above: appAutoStart=true deviceType=IPC-HFW1320S hardwareVersion=1.00 processor=DH6000 serialNumber=ND031709003847 updateSerial=IPC-HDW1320S-V2...

Thanks @pozzello appreciate the help :thumb: Original firmware was: LOREX_IPC-HFW1XXX-Alps_Eng_NP_V2.420.LR00.3.R.20160105.bin firmware used was: dh_ipc-hfw1xxx-alps_eng_p_v2.622.0000000.31.r.171229.bin I have a Lorex LNB3163B I'm assuming the Dahua equivilent is Dahua IPC-HFW1320S I did a...

@pozzello Took your advise and managed to flash it via TFTP and serial connection using the command line. Have the equivalent Dahua firmware installed but finding that every time I set any resolution, it reverts to 720P and 1FPS. Have one a fresh firmware installed as well using the firmware...

Thanks will give that a try. Ironically the FLIR was a newer camera than the Lorex! Unfortunetely I can't come across an old firmware to attempt a downgrade. Thanks anyways, appreciate the response :-)

This has been really helpful. Thank you to all for your contributions. I managed to flash a FLIR P143E4 4MP Outdoor Network Dome Camera successfully... but my Lorex LNB3163B cameras (2016) make no attempt to initiate a TFTP connection on 192.168.1.108 (monitored using configured TFTP server...

John, any success with flashing to a Dahua firmware? I have a Lorex NR916-N (09/2017) and I'm curious to see if i'm better trying to migrate to a Dahua firmware, considering Lorex haven't released an update since 2017. Does anyone know the Dahua OEM equivalent to this model? Any help much...