Search results

I'm running Firmware version: V3.0.15 build 151230 on my DS-7604NI-SE/P. This version is the most stable om my NVR, I had a lot of problems: https://www.ipcamtalk.com/showthread.php/7830-New-Firmware-for-DS-7600NI-SE-7600NI-V(VP)/page2 But all gone after this firmware. To upgrade, you might...

Sorry. I do not know if you can use this EU firmware on a Chinese version of the NVR. I think my NVR is an EU version

Just an update. The NVR is still stable, no “abnormal Shutdown” since the firmware upgrade in January 2016:) Firmware version: V3.0.15 build 151230

Hi Thx for the feedback, but I don’t think my problem is a hard disk issue. I’m using a 2 TB WD purple disk on the NVR. When the “Abnormal Shutdown” first began I also tested the NVR with another disk (1TB WD red), this was the same problem. I now run with the 2TB WD purple disk, have set the...

Hi FastCamMan I upgraded the NVR using an USB key locally on the NVR. I did not use the web interface. I shut down the NVR, removed all cameras, started the NVR and did the upgrade using the local GUI, after a restart I connected all cameras. I upgraded from V3.0.15 build150528 to V3.0.15...

Thx for your feed back :-) I have just upgraded the NVR to build 151230, there was no problem with the upgrade, I did it on the NVR with all cameras disconnected. I let you know if I see any problems with this firmware. Regards Spagnum :)

Thx for your reply, I also saw the new build, but there is still no release notes. But if this build only is made to support new cameras, then this will probably not fix my “Abnormal Shutdown” issue

Hi This is my problem: https://www.ipcamtalk.com/showthread.php/5705-I-need-help-Abnormal-Shutdown?p=50387#post50387

Hi I found a new firmware on http://www.hikvisioneurope.com/portal/index.php?dir=Product%20Firmware/Recorder/ There is a new build V3.0.15 Build151223 (R6) release date 25-12-2015 but there is no release notes :sad2: Have any of you tested this version? I have a DS-7604NI-SE/P I would like...

I have the same problem with my DS-7604NI-SE/P, but I have to format my 2TB WD Purble HD after approx 30 days. So if I buy the new model DS-7604NI-E1/4P/A do you think this will solve my problem, is this a better NVR. I'm desperate to get a stable system

Are the NVR still on V3.0.15 Build150709 and stable? Do you see any Abnormal Shutdown?

Hi Samee Did you upgarde the NVR with the firmware V3.0.1.15 Build150709? And if you upgraded, did this firmware fix any issues? I also have a NVR DS-7604Ni-Se/P with the Abnormal shutdown issue

I also tried with a 1TB WD Red disk, this disk also runs fine for 20 to 30 days, then the Abnormal Shutdown start. I don't have any problems with the systems until the Abnormal Shutdown begins, after some times with the Abnormal Shutdown the NVR also stops recording from one camera. It's like...

I have 3 working cameras with V5.2.3 build 141024, can I upgrade the camera to 5.2.5 using the web interface? I also have one camera with V5.2.5 build 141201, this was upgraded to 5.3.0 and then downgraded to 5.2.5 I would like to have all cameras on the same firmware

This setting is already enabled on the NVR

Hi All I hope I get some help with this issue. I know this is a lot of text, but I hope you will read this. Any help will be appreciated! Problem: After approximately 20 to 30 days my Hikvison recorder starts to do “Abnormal Shutdown” constantly, the recorder shut down down and...

Thx. This firmware also work with my Chinese DS-2CD2732F-IS, now the camera work with my NVR. I also made a bad firmware upgrade with the 5.3.0 EU version. Thx again, good job!