Search results

Sounds good Happy Holidays

@David L So I did read up on the forum post you provided, and because of the lack of a DH for the New ST app one guy suggests using this instead Zooz Z-Wave Plus S2 MultiRelay ZEN16 but he is using it with contact sensor "not sure of the difference or if it matters" So if you have a chance to...

Thanks for understanding my question, in its entirety, and great find. So in theory, one would simply wire up the current sensor and then feed the wired signal from it to the Fibaro device, which should inturn allow for the setting of Smart Things routines, Correct? And Yes, MERRY Christmas...

@David L 1'st Merry -Xmas 2'nd Having only Smart things, and no sort of wired alarm system, is there a cost effective way, I too could use the sensor being discussed? I also like the idea of it not requiring batteries, but how would I get the signal to Smart Things given no alarm system...

in fact I got the idea from a somewhat recent post it may have been yours

Frustration totally understood

If I was experiencing this issue, I would, use some sort of a remote switch/relay to restart the DoorBell. Then, automate it by monitoring one of the 24/7 streams, having it set up such as when the stream is dropped the Relay/Switch is triggered to restart the Doorbell this setup would have...

yeap hints at wattage

A larger or even smaller buffer size may make a difference if so it would be down to trial and error though

Sorry I forgot but the same ? are there settings for the buffering in either or both ?

Good? My guess is it is a difference in how the buffering is handled through the browser verses through BI are there individual buffer settings in BI for the live view stream I ask because although I plan to eventually use BI I have yet to but it doesn't negate the need for a stronger trans...

or Both even, Yes it is likely that you have just enough power to record a smooth stream but not to veiw it for a set period of time at the same time. If your trans is a standard builders grade at 16V 10A, then that is likely the problem. So if that is your case I would start their look for a...

That's what makes me think it's a network buffering issue. If you understand how a basic buffer works it is usually a set kb /mb and depending on what that size is it can take up to an hour or more to populate the problem is that different networks handle buffering based on certain settings...

Not necessarily, as the recording isn't having to be played or viewed, it gets written directly to disc, so the buffering issues aren't present like they are for a viewed live stream

What type of router are you using does it offer advanced settings like for Spanning Tree Protocol and or Jumbo Frame? Also does your router have a upnp setting ? If so, You might try enabling /disabling those settings one by one to troubleshoot the choppy video after a time issue sounds like a...

You may want to check out, WorkFlow automation app for IOS and ,see if it can do something similar,"in IOS", to what I suggested for Android/Tasker users

If using android phone, Then yes Using an app called Tasker, you could set this up in several different ways. The easiest i could think of would be to, have tasker turn off all notifications from The Ezviz app when connected to your home's Wifi/SSID. the only problem I could forsee with this...

Did you do a full reset and then follow the procedure to change the ssid after updating to Hik fw @alexdelprete confirmed that it is necessary to do the full reset to avoid such hiccups when using a non native fw

Could it be that the DB is registering all motion events weather or not it is adequate enough to set off an actual detection or not? "regardless of, your detection settings/sensitivity settings" For example every time a leaf twitches, and, etc.

Welcome, @Dewcal, :headbang: Just my 2 cents on your issues, In my opinion, if you intend to , "eventualy"' add, a Chime and, if, "the info you provided", is, True, Then, I fear, you will be, "majorly/severely", underpowering the device, if, What you stated, about your, "GROTHE GT3139 12v 1A...

I'm almost positive that it was confirmed by @alexdelprete, sometime in the last week, that, the outdoor chime off settings only stick, when, using the Ezviz Model with the Ezviz FW with other configs the setting is available but it doesn't stick

@Jack007 What @alexdelprete said, "Just above", and, F.Y.I, when someone attempts to help you there is a like button at the bottom of every post, Hitting that button is how we show appreciation in a forum such as this. The above statement is in no way meant as a Jab. I'm simply pointing it...

They have their own appstore now it's not on the playstore i think the link is in the 101 if not check @alexdelprete's posts from the past few days he gave the link recently

@Jack007, Use the Hk, or, Guarding Vision app to check chime selection

DavidL is a great guy, He and his family will be in my prayers... I had the same thoughts a couple days ago! Thanks for letting us know!

Thanks @pete_c Is the following portion configured in the addon, or, does it require further knowledge? " You can create a pop up preview any size any place on your Kodi screen (well like bottom right). "

Definitely interested in a pop-up on DB-button press for Kodi Using Kodi exclusively for going on 2yrs now on an arm 912amlogic android box, and two versions of the Nvidia Sheild 2017 and 2019

+1 Along with the procedure, "@alexdelprete laid out a few posts back" for SSID change.

Thank you @alexdelprete This is exactly the motivation I need, to finally get around to installing my DB-1! Hopefully a more direct route can be found for the Google stream something comparable to what @pete_c uses for amazon "The Monocle proxy application" , to alleviate the delay you...

Now that @alexdelprete has confirmed DB1 + HK fw = ONVIF, &, Alexa I'm very interested to here if Google is also possible via this setup as I Have the Ezviz DB1 model and use both Amazon & Google smart displays throughout ONVIF + Amazon + Google this trifecta, is what I've been...