Search results

  1. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    but it misses, thats what i saw why it took me a minute to figure out, I would get detections then it would gag and miss a few and recover. I did what the guys suggested above and working good now.
  2. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    thank you guys I believe I have it working again getting tags at my gate no problem service not crashing during detection.
  3. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    I did a clean install and it finally shows modules after restarting service but i have this .net one just in limbo
  4. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    I have to ask this one also, Code Project was in the Wind, Shut down, Blue Iris leaning to another Blue Candle option, then all sudden Code project has update and Modules install again, and their site no longer says Woe is me were done, any one see any news about this are they back or just a new...
  5. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    so i have been using Yolo 5.6.2 but its also prompts for yolo .net did any one else also install those versions of Yolo?
  6. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    Currently re-installing with the tic box to remove all data and modules
  7. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    Thank you i will give that a try, I did update .net so far its holding but waiting for a car to go past the gate and see if it dings. Thank you for the comments.
  8. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    I did install over it not a clean install, even kept the modules, Bad Idea? should I do new version again clean install then pick my modules?
  9. Dudleydogg

    Updated to the Latest Version of the Code Project,Server version: 2.9.5 Crashes each time object is detected

    I updated today and stopped getting reliable information. Each time I check the status, it's in a "Lost Contact" State. Has anyone else updated and has a similar issue? I just updated .Net even though the installer did some other versions also to see if that was it. also downloaded previous...
    • Dudleydogg
    • Thread
    • blueiris alerts codeproject ai
    • Replies: 19
    • Forum: AI
  10. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    you can access a cloud key or docker container running your controller locally. it just wont ever update and you would need local user/pass
  11. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Funny Story, I put the cloud key on same vlan as all the hik cameras, it found them and adopted and Logged in, then I put cloud key back on original vlan and they all stayed connected.
  12. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    so for those who ran into my issue where I could not "Manually adopt" always failed, I put the cloudkey on same vlan as the cameras, meaning I lose all my other network gear, Ignore that adopt all the cameras, then change the IP back to original cloud key vlan and all the HIK cameras re...
  13. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Ok so i got the Hikvision camers to work but I realize there are no detections whatsoever its just constant record, is what also same for everyone?
  14. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    OK i put a couple cameras on same vlan and sure enough the populated clicked adopt and failed till I enabled the username&token option. i have only 2 cameras that have that feature in onvif so I either need all new HIK LOL or switch to UI and be done with it.
  15. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    all the cameras communicate with vlan 1 because all my viewers are on vlan 1, I can ping the camera from the Unifi ssh console, The error is instantaneous. like its didn't even try to authenticate just instant "invalid credentials" ill put a camera on same vlan as uniif and see if anything kicks
  16. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    another thing I notice the Failure is Instant not like it tried to authenticate, just instant Fail.
  17. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    so in my case here my Cameras as on Vlan 20 and my console is vlan 1 but routed across the Vlans, I opened a ticket with unifi and they said they were aware of the problem that's why I came here to see if anyone didn't have the problem. I have to do the Manual Adopt option.
  18. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    yep did that still says "invalid Login" did you get any hik cameras to work maybe I'm still doing something wrong
  19. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    so is it kind of a transition to get you to replace with unifi not a usable position? when I try to add Hikvision camera I get "invalid login" any tricks you may have done differently?
  20. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    Known issue opened ticket with unifi yesterday, just they can't give me an answer on when it will be fixed. make sure all your devices have a specific "Onvif Login" configured
  21. Dudleydogg

    HUGE RUMOR: Unifi Protect will support ONVIF cameras (like from HIK/Dahua)

    No longer a rumor its there but does not work, if anyone has got it working with Unifi please reply back to me thanks
  22. Dudleydogg

    CodeProject.AI Version 2.5

    I am interested in this also, I get strange alerts now, my gate is a tennis racket it reads the signs on the gate as Tags LOL
  23. Dudleydogg

    Blue Iris and CodeProject.AI ALPR

    So now that I have created this Clone, for this data I have double Camera there is there better method so only have recordings for the one camera but to get these CP alerts. I am having issues with it reading gate signs and it also thinks the metal logo on the gate is a tennis racket.
  24. Dudleydogg

    Blue Iris and CodeProject.AI ALPR

    Ill be OK that totally worked, but using Object:0 not the license custom model, thank you for that.
  25. Dudleydogg

    Blue Iris and CodeProject.AI ALPR

    the custom models where are those located again and do they need to be updated also or come with code project? also is it possible to see plates in Blueiris web UI I think someone said I could just not sure how
  26. Dudleydogg

    CodeProject.AI Version 2.5

    I see the tag on the thumbnail but MMO just has car info, something I need to setup somewhere? where is "Plate Field"
  27. Dudleydogg

    CodeProject.AI Version 2.5

    Side Question is theree any way to see the ALPR data in the Web browser part of blue iris, also if I see in thumbnail where else is this data?
  28. Dudleydogg

    CodeProject.AI Version 2.5

    remind me to miss the July 4th barbeque LOL
  29. Dudleydogg

    CodeProject.AI Version 2.5

    and Deer are cows and cats are dogs LOL
  30. Dudleydogg

    CodeProject.AI Version 2.5

    things are rolling this Morning, the 1080 is rocking, Its even running cooler than the 970 was. Tags are hit or Miss but they are there, I thought there was a way to see in Bi logs all the tags detected.
Top Bottom