Search results

I wasn't planning to - unless I've exhausted every option with this camera..... What do you suggest i do with this camera once it's hooked up? Are you thinking firmware hacks or updates to it?

Yes to all of these. I have all these bits and pieces.

Yes it is still in Manual mode, not Plug N PLay. But the Management Port, Channel No., and Transfer Protocol fields are all Greyed out. I managed to get the Management Port set to 8000 by changing the Protocol field to HikVision, then all the fields become changeable - then change the Management...

Ok - so I can do this and get onto the Camera login (in chinese as predicted). The IP address matches on the NVR GUI. But - what about the "Management Port"? It is coming up as 0 in the NVR GUI now. And the strange thing is that I can't seem to change it through the Modify section on the Camera...

Yep - Camera IP matches in SADP and in the NVR GUI Camera Management page. "Network Abnormal" :(

No dice - it states "Offline (Network Abnormal)" under the Status field in the Camera settings, and no live feed.

Yup - It still comes up with 'Language mismatch'

I love a challenge, so I'm up for tampering with it. The way I figure, its not working now so it can only get better from here! The CCTV is working on the other 3 for now, so no issue there. The camera is plugged in, but easy enough to pull out and apart again. I was thinking of trying another...

Camera 1 : DS-2CD2345-I20170320AAWR730894444 Camera 2 : DS-2CD2345-120170320AACH730894594 (not working - this is the camera that I attempted multiple firmware changes to) Camera 3 : DS-2CD2345-I20170320AAWR730894445 Camera 4 : DS-2CD2345-I20170320AAWR730894595 The camera (2) looks identical to...

DS-2CD2345-120170320AACH730894594 is the one that isn't working (and its the one I played with the firmware on)

One of the working camera's serial numbers is : DS-2CD2345-I20170320AAWR730894444 So no CCCH.

Hi Alastair, So after a bit more mucking around - reverting to the old password, then plugging in each camera - I have got it working. I have also now been able to change the Password and it has pushed the new Password to the camera's. Success! That is, all except for the 1 camera that I...

crumbs - I seem to have a problem with this. I don't know which camera was in each port and now they won't work. I've tried plugging one camera in at a time, moving it across each of the 4 ports. It comes up with "Detecting" in the Camera Menu, but then after 20 sec or so it comes up with a...

You are a champion! That's it. Thanks for your help on this. Now to plug it in and see if I can get all the cameras to reset as well.

It looks like it all worked - here are the files (attached). FINGERS CROSSED!

The parts have arrived and I've managed to connect to the Serial Port through PuTTY. When it boots, I'm getting all the log data coming through the PuTTY Terminal. Starts with "U-Boot 2010.06-svn (Aug 15 2015 - 15:18:43)" then all the login scripts start scrolling past. I can't seem to attach...

So the parts arrived... except for the JST ZH connector :( On order from Ebay now. Inching closer to the solution!

Yep - we love it here - close to the perfect Perth beaches! So I've got the bits you've suggested on order (in the mail). Also emailed HikVision to request a password code/file, but as I expected they have given me the "we don't deal with consumers directly" nonsense. Very frustrating...

I'm in Perth, Western Australia. Thankfully no fires near my home!

Make that KEPLER-7604/4P.....

Thanks for the G0 CN firmware - but unfortunately, same problem. The TFTP runs through to "Completed", but without any "Success" and the camera shows no change in its firmware when plugged back into the NVR. The NVR Model and firmware versions are : KEPLER-7604/5P0420161221AARR695594255WCVU...

Looking through the firmware sites, I can't find any reference to a DS-2CD2345-I camera on any of the firmware notes. Google-searches also don't seem to come up with 2CD2345 camera's anywhere. However, the physical appearance of the Camera is identical to the DS-2CD2342WD-I camera (here). I'm...

The Serial Number of the Camera through SADP is DS-2CD2345-I20170320AAWR730894594

Hi Alastair - so I plugged the camera into a 12v Power supply. I then connected it to my laptop via Ethernet (direct connection, no switch for the first time, then I plugged through a standard switch - without PoE - the 2nd time). I set the IP on my laptop to 192.0.0.128. I've downloaded the...

Hi Alastairstevenson - so I've had some success. After realising that the Power supply I was using was only 12V (!!), I found a 48V Power supply - and the system now starts up correctly -> the HDD runs (no more Di-Di-Di beeps), and the Camera POE is working correctly. I've managed to do what you...

OK - so after pulling one of the cameras out, it has 2 plugs on the camera - an ethernet cable that was plugged in, and a circular plug which, after checking out the online specs for the camera, it is the power cord/plug. This power cord/plug was not connected to anything. The camera's are...

Hi Alastair, I'll have to get one of the camera's out of the roof and see how it is powered. It is strange that all 4 camera's aren't working - because we saw the system working when we purchased the house. But the system is also making a "Dii-Dii-Dii- Di-Di" sound when it is turned on, which I...

Yes - I have tried this, but it doesn't seem to work. Thanks for the suggestion

Thanks alastairstevenson - I've connected my laptop to a port on the NVR, set my Laptops IP address to the same subnet as the NVR, and running SAPD I can see the NVR device. I can't see any of the cameras that are plugged in though - and looking at the back of the NVR, none of the lights are...

Hi folks, I'm hoping someone can assist me with resetting the password on this NVR. We purchased a house with a 4-camera system, but unfortunately the Owner gave us a bum-steer on the password, so we can't get into the system! After reading several threads, I've tried using SADP to connect to...