Search results

I really hope the FS in FS Community stands for Fucks Sake

A small load of cams should be fine on a 10/100 Reolink, but our seasoned veteran @looney2ns always recommends the Netgears. I believe they have some models with Non-POE ports, POE as an electrical standard is well established...

The reolink ports are 10/100. the NetGear ports are Gigabit 10/100/1000. more is better. Some systems may act fine with a 10/100 switch, but i havent found that to be the case for my 2 systems of BI.

this is another reason I recall moving my cams to a POE switch. my nvr played hell loading those :10081 URL's due to the low bandwidth of the NVR and all the traffic of all the other cams coming into the house one 1 Cat5e. when i swapped them to a POE switch the URLS loaded faster. and not...

how about the IE tab available for Chrome/Edge it's an addon to chrome. google it.

Welcome. Resist the temptation to update any firmware for no good reason. ( we've all done it) sometimes to horrific results, Sometimes you skate by unscathed. not versed on TIoC cams yet. somebody will respond eventually.

I think I saw one of these fly over my truck in the Nevada Desert just south of Groom Lake....:)

the other LPR isnt really on duty as LPR at the moment. but here are it's settings. Same exact cam as above but in totally different lighting situation. Same car ( mine) day VS. Night color

Of course now with the 5442 Z4-E's I can get away with night/day captures, and the "focus hunt" is a non issue. But i can still miss plates during twilight hours because of this. When i set my day and night settings up I temporarily use the " full Time" profile, then there are no greyed out...

I have 2 systems running BI. None of the cameras EVER reboot. unless of course there is a power interuption, or I manually restart it while I'm present. this solves your "focus hunting" problem during transition. I had a Helluva time learning to Dial in the Condo LPR cam with day and Night. The...

I used to work at Microcenter computer store. Sometimes custom boards have unexpected defaults and or drivers that cause issues. not so much these days, but seen it on custom builds of my own in the past. it's a clue that both people having issues are running Asus boards. Been a long time since...

Perhaps the Video writes have exhausted the SSD. 2.5 years of continous writes could be an issue. Spinning drives have better longevity for video writes. Swap out your video storage SSD with another known good drive and see what happens.

my cams are now " off the bossy NVR" and thusly no longer " slaves" to the NVR, because they are on a POE switch ( 192.168.0.xxx) with a different IP address than the internal NVR POE switches 10.x.x.x I don't recall how I sorted this all out,,,,but since last fall, all the devices appear to be...

I'm using NET TIME as the NTP server on Windows 11 and the settings from within that PC app, I have fooled around with other NTP addresses from here as well. https://tf.nist.gov/tf-cgi/servers.cgi

Ihad this issue for awhile with 4108 Amcrest NVR( DAhua OEM) and an Amcrest XVR, where by the NVR was " the Boss" of " Time keeping" and the cameras were like "slaves" I forget how i figured out how to stop it....let me check some things. turn off the NTP and DST check boxes on the Cams and...

no special reason. other than to see when one of them goes "off the reservation" and begins reporting DST or isn't syncing w/Net Time/ I think as i recall one of them disappears when you export video to a file.....Or something. my OCD might have OCD.

You might have a glitchy piece of hardware in the mix,,,,or two things that don't play well together..........not so much the case anymore, but I recall having PC components that acted badly when asked to perform together.

Are you in fact testing the older PC as a comparison using the same Hard Drive/ NVME etc?

Fenderman always asks people if they used a Media Creation tool, and did a clean install, ( no factory bloatware) hopefully this is the case.

Where are your video Writes going to? a dedicated drive? not the NVME i hope. What kind of motherboard are you running? like a HP/Dell?Lenovo? or a custom board? is the memory verified to be running in DUAL channel mode in the Bios or in Speccy?

try an old ass version of Blue Iris. im running . dont run the bleeding edge version of BI. you'd be Beta Testing.

Here are some examples of reflectorized tape to aid the focus. I don't really use that far left one in first pic, because it was for the 5231 Z12E. but looking in the dark back yard with the other Z4 bullet i needed to play with how I focused on that reflector tape until I found the setting...

I have a very bright LED street light that was updated 2-3 years ago from Sodium.....but it depends on how the car moves through that light. Some are going straight and some are turning. Some are moving away, and some are coming with headlights on. Headlights washout color night mode from some...

here's an example of one like mine. $289...

https://www.ebay.com/itm/266721664758?epid=16043655030&itmmeta=01HW23VGVPJR866EME9AQ89XVB&hash=item3e19d99ef6:g:DBkAAOSwOI9kg0dJ&itmprp=enc%3AAQAJAAAA4FGqJ96lEf98Tr3WcDd4F5XwMtLayTSfPauqGq0P6dOkXi9mZoZ%2FUSHXemuB4eB6zxfVyaNnnOFDRCvG8PRGn0qudqdvIqP2uhxA7fKjUeCHpL1Qu9gueukHFhW3dCOCqQKZuPTmBIFoO6CLT...

Welocome...I'm having a good time running my Dell Precision 3630 tower with a gtx 1060 and 32 GB of ram. i have 4 drives installed, 2 250GB SSD's ( 1 is a clone of C:\ every 2 hours) 1 8TB WD purz. and another 8 TB for storage of other data. 5 more years might be a stretch on my 8th Generation...

i'd surmise it could be the garage switch or it's power source. if it's nearing it's thruput capacity with current devices, that could do it. Is it a Gigabit poe switch on all ports?

note to self.....where is my window breaking tool now? grrr. My uncle was big on fire extinguishers, He had them everywhere. I think he saw some things in WWII that shaped this behavior as field medic in the Pacific theater on ships and landing crafts. I wonder how he got off course to end up...