nvr configuration

  1. C

    4 x Cameras (IMOU IPC-T66AP) not working after disconnecting from NVR (IMOU N44P)

    Hi To isolate a particular camera problem I unplugged all 4 ethernet cables from the back of my NVR unit. Now the cameras will not show a green status in the interface and there is no video feed. What is going on with that and what do I need to do? Thanks in advance. Please let me know if I can...
  2. D

    Extending wifi range of IMOU NVR1108HS-W-S2-2AA5

    Hi there I am trying to configure my home wireless CCTV solution. I am using IMOU wireless NVR1108HS-W-S2 connected to Internet Router and IMOU cameras (2 x Bullet 2C and IMOU Cruiser). These cameras connect to NVR automatically when near to the NVR, NVR is placed in the ground floor while I...
  3. Eclipsed

    Help! Dahua NVR not finding ip random cams

    Hi All, newbie to the world of IP Cameras and desperately need some assistance. Here is my setup (please dont judge too harshly). NVR - Dahua NVR5216-EI Cameras - various brands (hikvision, annke, Dahua & some no-brand onvif cams etc). I have all Cameras connected to POE Switches (2 x TP Link...
  4. M

    Help With Specking a 25 4k Camera NVR

    Hello, I am looking at building a 25 4k camera system for my office and need help specifying what hardware we need for our NVR Server. We are planning on recording constantly using a low framerate 1080 sub-steam with motion-triggered full res. Additionally, we are looking at using CodeProject...
  5. L

    Can I route POE cams through a separate POE switch?

    Can this configuration be made to work? We are remodeling our old home for resale. When we lived there, we didn't care that the NVR was in our living room, but our agent says it's not a good look. We have installed a small POE switch (NETGEAR GS308EP) in the living room and plugged the four...