sip

  1. D

    Dahua VTO2000a SIP issue: stops working every time few days after reinstallation

    Hi My vto2000a and VTH worked for long time (with vto as SIP server), but recently I noticed that the VTH did not react anymore when someone pushed the VTO button at the door. The DMSS app still gets the signal, but that is P2P. I could not solve the issue so reset both VTO and VTH and...
  2. DPS-Technical

    Dahua Door Station VTO Third Party SIP

    Hi, I'm currently attempting to configure a Dahua Door Station VTO with a third party SIP gateway. I'm using a GrandstreamUCM6202 and I've got it registered with the necessary inbound/outbound rules. I can't seem to get the VTO registered with the gateway, any help would be appreciated :)
  3. R

    VTO2000A + VTH1560BW - video issues when calling VTO->VTH, opposite direction is ok

    Hi all, I have following setup: Outside: VTO2000A - firmware V4.300 (new one with SIP) Inside: VTH1560BW - firmware V4.300 (new one with SIP) Wired with CAT6 and CAT5 cable. After firmware upgrade I performed factory reset on both. Both see each other in terms of configuration, no apparent...
    • rafg
    • Thread
    • dahua door station firmware indoor sip sound problem video problem villa outdoor station vth1550ch vto2000a
    • Replies: 2
    • Forum: Dahua
  4. stavros54cy

    Dahua VTO/VTH group call issue

    I am having an issue with Dahua doorbell in VTO and dual VTH setup. It was already set up and working, until I decided I wanted to upgrade to the latest firmware, because I was bored ( I know, upgrading something with no reason while it is working, it is asking for trouble, and I got trouble)...
    • stavros54cy
    • Thread
    • dahua dahua vth1510ch group call sip vth vto vto2101
    • Replies: 10
    • Forum: Doorbells
  5. IT-man

    How to integrate Dahua intercom SIP version to other SIP servers.

    Hi I am using VTH1550CH & VTO3211D-P2. both of them upgraded with SIP firmware successfully. I could successfully register my extensions in the SIP server(ZYCOO U20) :) , but can not make calls :(. I think it's codec problem , although I've already enabled the video stream codec(H.264) and...
    • IT-man
    • Thread
    • dahua doorbell intercom sip vth vto
    • Replies: 3
    • Forum: Doorbells
  6. I

    Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

    Hi there, I am currently looking into VTO3211D-P2 as the IP intercom for a two unit home. (Note: Newer generation: Recommended Replacement: VTO3211D-P-S2/P2-S2/P4-S2 but on the first look not much different really) It is a compact intercom / door station for two units - runing over IP (or to...
    • int
    • Thread
    • dahua doorbell firmware help intercom ip intercom poe sip vto3211 vto3211d-p2
    • Replies: 507
    • Forum: Dahua
  7. I

    Recording Feed from SIP Video Intercom

    Would it be possible to record the video stream from a sip video intercom, specifically a Fanvil i30? I have a freepbx server in place along with a box running blue iris. For security sake I'd like to record video stream if possible from the video intercom. The i30 does output video in h264...
Top Bottom