Tygunn
Getting comfortable
- Joined
- Dec 24, 2016
- Messages
- 399
- Reaction score
- 314
First I'll caveat this with: Does Andy make great inexpensive junction boxes? Yes, yes he does. However, I figured why not spend 4x the effort and 3d print my own!
I still need to 3d print the TPU gasket for between the top and bottom part, and a gland for the cables behind the camera. The hole at the bottom is for a standard PG-9 cable gland; I need to adjust the thickness where the gland is though as the nut doesn't fit on; oops.
If anyone is interested in the final product I can throw it up on thingiverse.
![1689389042149.png](/data/attachments/167/167741-80caf6d0c44c29ff40a4aad70eedc525.jpg)
![1689389111852.png](/data/attachments/167/167742-35b16d0530327d3a625ce8014c782096.jpg)
![1689389141768.png](/data/attachments/167/167743-3897990bee9f65808b16833ee0d15b12.jpg)
I still need to 3d print the TPU gasket for between the top and bottom part, and a gland for the cables behind the camera. The hole at the bottom is for a standard PG-9 cable gland; I need to adjust the thickness where the gland is though as the nut doesn't fit on; oops.
If anyone is interested in the final product I can throw it up on thingiverse.
![1689389042149.png](/data/attachments/167/167741-80caf6d0c44c29ff40a4aad70eedc525.jpg)
![1689389111852.png](/data/attachments/167/167742-35b16d0530327d3a625ce8014c782096.jpg)
![1689389141768.png](/data/attachments/167/167743-3897990bee9f65808b16833ee0d15b12.jpg)