Accessing individual cameras connected to a built-in PoE HikVision NVR switch

[montecrypto]

Sorry to disagree - but that's not so. Either in standard Linux, or what's in the NVR.

Just tested. I stand corrected. "Virtual host" does control ip_forward.

Also, static route syntax for windows is:
route add 192.168.254.0 mask 255.255.255.0 <NVR-IP-ADDRESS>

 

[starcat102]

Why wont you use "virtual host" function from NVR? This way you can access each camera connected to PoE "switch" from outside, just type IP address of NVR and port 65001, 65002 etc.
For exaple
192.0.0.64:65001 for camera 1
192.0.0.64:65002 for camera 2
192.0.0.64:65003 for camera 3

View attachment 5584View attachment 5583

Hi Korgoth,

which NVR version ae you using? I don't have the Advanced Tab under Network. HTTPs is just the last menu-item under Network, despite having the same NVR model (DS-7608NI-SE/P) as yours. Should "Advanced" be enabled somewhere? I am logged as admin... Any help is greatly appreciated.

Thanks!

 

[zero-degrees]

Hi Korgoth,

which NVR version ae you using? I don't have the Advanced Tab under Network. HTTPs is just the last menu-item under Network, despite having the same NVR model (DS-7608NI-SE/P) as yours. Should "Advanced" be enabled somewhere? I am logged as admin... Any help is greatly appreciated.

Thanks!

I believe you have older model/firmware - see this guide to possibly assist.
[Tutorial] Using a Hikvision NVR's "Virtual Host" Feature

 

[starcat102]

I just saw that I have firmware build V2.3.4 build130715...
I it necessary to upgrade it in order to see that Virtual Host feature? If yes, how can I upgrade it, I don't see a menu in the Web GUI?

Thanks again!

 

[zero-degrees]

I just saw that I have firmware build V2.3.4 build130715...
I it necessary to upgrade it in order to see that Virtual Host feature? If yes, how can I upgrade it, I don't see a menu in the Web GUI?

Thanks again!

Did you check the guide I linked above? If that works don't worry about firmware upgrade

 

[starcat102]

Not really, I don't have the Advanced Section under Network Management... Is V3.0.15 Build151230 (R6) the firmware you are running, just find on the Hikvision site.

 

[starcat102]

Upraded to V3.0.15 Build151230 (R6) but I still don't get that Advanced Tab below Networking... My GUI also looks different as to what is shown in the Tutorial above... Makes me crazy!

I have the DS-7608NI-SE/P

Can I connect to the NVR by ssh and add IP forwarding manually on the cmdline?