Add IPC to VTH5241DW intercom monitor

[Yvon]

I have a nvr4204-p-4ks2 with 2 IP camera's and the door intercom system VTH5241DW monitor + VTO3211D-P outdoor station.

I would like to be able to see the 2 IPC on my VTH5241DW.
I have tried to add these using following settings:
IP 192.168.0.108 (=IP NVR)
User: admin
Password: ****
Port: 37777
Stream: sub stream
Protocol: local
Channel: 1 NVR

I get a message saying installation succesfull but when i then view this camera it says "device offline".

Are there any other settings that need to be set/changed?

 

[int]

Hi there,
could u solve this !?

Thanks,
INT

 

[Yvon]

Yes, I did!
I think it had something to do with languages.
The VTH monitor was set to Dutch and everything else to English.
After completely starting over with the installation and everything set to English it now works fine.