adding a new camera and one of my other cameras gets the same IP

[Coldair]

I initialized the new camera than changed the camera's IP in the camera's GUI. opened and close the camera in browser window than I add it to BI.,
when I search for it than add it and close the bi and reopen it I get the new IP on an existing camera and the new camera

 

[Mike A.]

Settings > Video > Configure > CHECK Skip initial MAC, etc. tests.

Do for each cam.

Edit: Wrote that wrong at first. Should be CHECKED not unchecked.

 

[Coldair]

Thanks Mike
now to figure out how to get my speed dome to auto track again. it stopped in June after an update

 

[ZoeGutierrez]

Settings > Video > Configure > CHECK Skip initial MAC, etc. tests.

Do for each cam.

Edit: Wrote that wrong at first. Should be CHECKED not unchecked.











Make sure each camera has a unique, static IP assigned, either through your router's DHCP reservation or manually in the camera's settings. After changing the IP, restart both the camera and Blue Iris to ensure the new settings take effect. If the issue persists, remove and re-add the camera in Blue Iris to reset the configuration properly. My younger brother was panicking over an essay deadline, so I helped him look for writing services. We decided to try canadianwritings.com and it turned out to be the perfect choice. The team provided an exceptional paper that followed all the guidelines and was delivered on time. My brother was thrilled with the result and received great feedback from his professor. I’ll be recommending this service to my friends as well.

Thank you so much.