Aloha! I hope all I well with the world!

:welcome:

The three basic rules of video surveillance cameras-

Rule #1 - Cameras multiply like rabbits.
Rule #2 - Cameras are more addictive than drugs.
Rule #3 - You never have enough cameras.

Quick guide -

The smaller the lux number the better the low light performance. 0.002 is better than 0.02
The smaller the "F" of the lens the better the low light performance. F1.4 is better than F1.8
The larger the sensor the better the low light performance. 1/1.8" is better (bigger) than 1/2.7"
The higher the megapixels for the same size sensor the worse the low light performance. A 4MP camera with a 1/1.8" sensor will perform better than a 8MP camera with that same 1/1.8" sensor.

1/3" = .333"
1/2.8" = .357" (think a .38 caliber bullet)
1/1.8" = .555" (bigger than a .50 caliber bullet or ball)
1/1.2" = .833" (bigger than a 20mm chain gun round)

Don't believe all the marketing hype no matter who makes the camera. Don't believe those nice night time captures they all use. Look for videos, with motion, to determine low light performance. Any camera can be made to "see" color at night if the exposure time is long enough, as in half a second or longer. Rule of thumb, the shutter speed needs to be at 1/60 or higher to get night video without blurring.

Read the reviews here, most include both still shots and video.

Avoid Reolink, Foscam, SV3C, Nest, and all the other consumer grade cameras. They all struggle mightily at night and never get anything useful on video. Here's a link to a whole thread debunking Reolink in particular.

Compiled by mat200 -

Avoid WiFi cameras, even doorbell cameras. WiFi is not designed for the constant, 24/7, load of video that a surveillance camera produces. At best, with two cameras on WiFi, they will still experience dropouts multiple times daily. Murphy's Law says that will happen at the worst possible moment.

Lens size, focal length, is another critical factor. Many people like the wide, sweeping, views of a 2.8mm lens but be aware that identification is problematic with a lens that wide. To get a real identification shot, good enough to serve as evidence, with a 2.8mm lens the subject needs to be less than 15 feet from the camera. Mounting any camera above 7 to 7-1/2 feet will result in shots of the top of heads and no identification at all. Watch videos to learn how to analyze each location for appropriate lens size and keep in mind that it may take two cameras to provide the coverage you need or desire. Another factor that effects view angles is the sensor size. Typically larger sensors will have a larger field of view in any given lens size.

The 5442 series of cameras by Dahua is the current "king of the hill". They are 4MP and capable of color with some ambient light at night. The 2231 series is a less expensive alternative in 2MP and does not have audio capabilities, no built in microphone, but is easier on the budget. The 3241T-ZAS has similar spcs as the 2231 and has audio. There are also cameras available from the IPCT Store right here on the forum and from Nelly's Security who has a thread in the vendors section.

The safest route is to buy one, good, varifocal camera first and use it to check views and focal length requirements. It can be mounted to test rig, a five gallon bucket of stones or sand with a 2x4-8 in it, to mount the camera to. Test each location for at least a full day to get both day and night views. Have someone walk past the camera with a ball cap or hoodie on and see if you can actually identify who it is based on the video, not on your knowledge of the person.
 
Last edited:
Hello, welcome to the forum.
 
Welcome to IPCT ! :wave:
 
  • Like
Reactions: sebastiantombs
Welcome aboard and please keep your seatbelt on and your hands and feet inside the vehicle at all times
 
Welcome aboard and please keep your seatbelt on and your hands and feet inside the vehicle at all times
"...and please return your stewardess to her original upright position". :p
 
  • Haha
Reactions: sebastiantombs