strasharo
n3wb
Hello. Can someone, please, recommend a junction box which fits the Annke NC800 turret version?
![1712225568398.png](/data/attachments/191/191427-ee9e9985a04c86cf88054b5382219eb7.jpg)
Measuring on my own I purchased HIKVISION: DS-1280ZJ-DM21, which fits in diameter but the screw holes don't align.
Then I went ahead and asked Annke support which junction box does fit and they suggested getting the Hikvision DS-1280ZJ-PT6 instead. however that one appears to be slightly more narrow than the camera and if you align one of the screw holes it's impossible to align the other two:
I sent the photos to Annke support again and they responded with this:
![1712225798873.png](/data/attachments/191/191428-b39f71080cb290d198aefd13e259fe07.jpg)
So now I'm stuck with two incorrect junction boxes and wondering what to get next.![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
![1712225568398.png](/data/attachments/191/191427-ee9e9985a04c86cf88054b5382219eb7.jpg)
Measuring on my own I purchased HIKVISION: DS-1280ZJ-DM21, which fits in diameter but the screw holes don't align.
Then I went ahead and asked Annke support which junction box does fit and they suggested getting the Hikvision DS-1280ZJ-PT6 instead. however that one appears to be slightly more narrow than the camera and if you align one of the screw holes it's impossible to align the other two:
I sent the photos to Annke support again and they responded with this:
![1712225798873.png](/data/attachments/191/191428-b39f71080cb290d198aefd13e259fe07.jpg)
So now I'm stuck with two incorrect junction boxes and wondering what to get next.