Anran nvr

W

wismo

n3wb
Feb 9, 2025
6
2
massachusetts
Hi so I have an older maybe 2017 Anran 4 camera setup nvr.
Recently the 7 inch nvr monitor failed to initialize it is stuck in a sort of loop and says no connection.
I have tried the seecloud from Anran website. I need ip address from camera I looked in my router settings for ip address.
Not really sure what to do are the cameras married to the nvr display
 
Is the camera-to-NVR connection wireless?
If so, their connection is likely proprietary/encrypted and doesn't involve your router as far as the cams go; the NVR's LAN port may be connected to your LAN and could have an IP assigned by the router's DHCP server.....look under the router's network "devices" or "clients".

Is there an alternate video output (VGA or HDMI) on the rear of the NVR?
 
Is the camera-to-NVR connection wireless?
 
I'd say if you got close to 8 years out of it you faired well. :cool:
 
  • Like
Reactions: mat200
wismo said:
So not to beat a dead horse but would I be able to hear that with another NVR monitor
Click to expand...
I doubt it, likely an issue with the wireless between the NVR and cams or the NVR alone.
 
I'm not going to pretend I know anything about what's going on with the cameras but does the NVR assign an IP address to it or do the cameras have its own IP address sometimes I don't know the right questions to ask kind of want to get this going back again cuz I'm not in a position where I want to replace the cameras if I don't have to
 
You must log in or register to reply here.
Top Bottom