Any Dahua NVRs that support DUAL HDMI output?

[stevef22]

Maybe Im wording this wrong... but my single LCD can not display all 8 cameras clearly. I would like 4 on one screen and 4 on the other screen.

Do they make a simple HDMI splitter that can take the 8CH and display on two screens?

Or a NVR that has hardware controlled two HDMI outputs?


Thank you

 

[looktall]

Sounds like you might need a bigger screen.
I don't think what you're asking is possible.

 

[DsineR]

I have this monitor: 49" Odyssey G9 G95C DQHD 240Hz 1ms(GtG) DisplayHDR 1000 Curved Gaming Monitor | Samsung US
Like having two 16x9 monitors side by side.

 

[Underhill]

All of the N98 series have 4 that can be configured independently. Splitting your existing one is just going to mirror. Cheaper route would be a computer with 2

 

[steve1225]

Maybe Im wording this wrong... but my single LCD can not display all 8 cameras clearly. I would like 4 on one screen and 4 on the other screen.

Do they make a simple HDMI splitter that can take the 8CH and display on two screens?

Or a NVR that has hardware controlled two HDMI outputs?


Thank you

All Dahua 5xxx NVRs have HDMI + VGA - where VGA can work independently from HDMI.
You must enable sub screen in Display settings.
HDMI will be 4k, VGA will be only 1080p.
You can configure separate 2x2 or 3x3 displays on each.

Any 4 disk NVR (like 5416-EI or 5432-EI) will have 2 separate HDMI (each 4K)...
6xx NVRs have 4 separate HDMI + 2 separate VGA (can display 6 separate video feeds, at cost of lower AI by NVR performance)..

 

[stevef22]

All Dahua NVR's have HDMI + VGA - where VGA can work independently from HDMI.
You must enable sub screen in Display settings.
HDMI will be 4k, VGA will be only 1080p.
You can configure separate 2x2 or 3x3 displays on each.

Any 4 disk NVR (like 5416-EI or 5432-EI) will have 2 separate HDMI (each 4K) + 2 separate VGA (1080p only)..

Thank you very much. I will ask Andy for these models.

 

[stevef22]

All Dahua NVR's have HDMI + VGA - where VGA can work independently from HDMI.
You must enable sub screen in Display settings.
HDMI will be 4k, VGA will be only 1080p.
You can configure separate 2x2 or 3x3 displays on each.

Any 4 disk NVR (like 5416-EI or 5432-EI) will have 2 separate HDMI (each 4K) + 2 separate VGA (1080p only)..

Thank you

 

[stevef22]

I have this monitor: 49" Odyssey G9 G95C DQHD 240Hz 1ms(GtG) DisplayHDR 1000 Curved Gaming Monitor | Samsung US
Like having two 16x9 monitors side by side.

Thank you

 

[steve1225]

Thank you very much. I will ask Andy for these models.

With 2 HDMI:

EmpireTech NVR32CH-4AI 32 Channels 1.5U 4HDD Network Video Recorder

Multiple decoding formats | AI by recorder | AI by camera | Security baseline 2.3

empiretech01.com

EmpireTech NVR32CH-16P-4AI 32 Channels 1.5U 16PoE 4HDDs Network Video

Multiple decoding formats | 32 × 1080p@30 fps or 32 × 2MP@30 fps | Max. 384 Mbps bandwidth | Support AcuPick with Max. 16-Channel | Support N+M cluster | AI by recorder | AI by camera | Security baseline 2.3

empiretech01.com

With 4 HDMI:

EmpireTech NVR32CH-8XI 32 Channels 2U 8HDDs Network Video Recorder

Support multiple decoding formats | Max. decoding capability: 32 × 1080p@30 fps | Supports AcuPick with up to 32 channels | AI by Recorder | AI by Camera | Supports N+M cluster | Raid 0/1/5/6/10, ISCSI | Allows for HDD hot swapping | Supports EPTZ | One-click Arming & Disarming | Security...

empiretech01.com

EmpireTech NVR64CH-8XI 64 Channels 2U 8HDDs Network Video Recorder

Support multiple decoding formats | Max. decoding capability: 32 × 1080p@30 fps | Supports AcuPick with up to 64 channels | AI by Recorder | AI by Camera | Supports N+M cluster | Raid 0/1/5/6/10, ISCSI | Allows for HDD hot swapping | Supports EPTZ | One-click Arming & Disarming | Security...

empiretech01.com

 

[stevef22]

Thank you!