arming schedule changes

[qmicsen]

Hi,
I bought and installed 2 2125FWD cameras a few weeks back.
To get day/night to work I had to schedule it(probably due to backlight).

both cameras has intrusion detect activated.
one of the cameras is 24/7 scheduled to detect intrusion.

the other one, shall detect and record at certain times only.

when I get nofification on this camera even when I know it is not scheduled to detect, I log into camera, and I can that detection changed to 24/7, why is this?
is it due to I change day/night settings 07-18?

attaching some pictures that shows my configuration.

/Michael

 

[StewartM]

To narrow down the issue - What firmware are they on? Are the notifications via email, Hikconnect app or third-party software? Which browser are you using to configure the settings?

 

[qmicsen]

Hi, thanks for your reply Stewart.
The camera is on FW V5.6.3 build 190923.
I´m using mail on Hikvision to other familymembers, Im getting my notifications/mails from Synology Surveillance Station.
I´m not using any Hikvision app, just browse to 192.168.1.11 and setup mail for daughter and wife.
Running openVPN server on Router to reach cameras from WAN.
Browser I´m using is mainly Chrome, unless I use my working laptop, then mostly Firefox.

The scheduling hasn´t changed for at least two days now...

/Michael

 

[qmicsen]

This is still an is for me, time of activation changes to 24/7 for both LineCross and Intrusion.
Why is that?
Tried several browsers.
Sometimes I get some notification about some package, dont know what that means.

Im setting time of activation and area in Hikvision, also recording.
In Synology Surveillance I set recording times as well, matching the time set in Hikvision.

This drives me crazy, anyone haveing an idea what the cause might be???