Assistance with CodeProject 2.8 Setup

Bluediamond

Bluediamond

Young grasshopper
Aug 30, 2019
79
13
Florida
Hello All,

I am super late to the AI game and really need some assistance here. I been using Sentry for years Solid AI but as of 5.9.9.11 I realized that Sentry was dropped and I only noticed because there was no recorded activities coming from my Cameras. So coming late to the party I quickly swung into action read through most of the CodeProject 2.0 thread that has about 100 pages now and setup CodeProject however I am noticing that its missing some captures and would like some assistance in making sure what I did was correct and not over looking a tab or setting I did not configure.

1733450290240.png1733447695849.png1733447733205.png1733450355534.png

Please any help would be greatly appreciated.

Thank You.
 
Last edited:
Before making any changes you might want to consider updating to the latest version of CPAI (2.9.4).
 
  • Like
Reactions: Skinny1
Uncheck the "Auto start/configure", you don't need it and it may cause issues! You are trying to capture everything in the objects field, I would suggest that you pare it down to just what is of interest, do you really want to identify a boat, elephant, zebra etc. on your street! You have "DayPlaste" and "NightPlate" but are not using ALPR??? Are you actually attempting to read license plates at that distance from the road. Are you really trying to capture facial recognition, once again you are probably too far away to have this work in the view that you have included above, perhaps you have other cameras! You have use GPU checked, do you have a supported Nvidia card installed with the CUDA drivers setup on it?
 
Bruce_H said:
Uncheck the "Auto start/configure", you don't need it and it may cause issues! You are trying to capture everything in the objects field, I would suggest that you pare it down to just what is of interest, do you really want to identify a boat, elephant, zebra etc. on your street! You have "DayPlaste" and "NightPlate" but are not using ALPR??? Are you actually attempting to read license plates at that distance from the road. Are you really trying to capture facial recognition, once again you are probably too far away to have this work in the view that you have included above, perhaps you have other cameras! You have use GPU checked, do you have a supported Nvidia card installed with the CUDA drivers setup on it?
Click to expand...
I recently set up a new Blue Iris machine.
I installed Blue Iris version 5 from the web site.
The AI tab on the settings page looked the same on the new install, with every possible object listed.
I emailed Ken, asked if removing the objects that are not relevant would hurt anything. He said no, so I deleted the objects that were not relevant to my situation.
I still see a counter for DayPlate, I don't know why. I am not using the LPR module.
FWIW, I don't think there is an object "aeroplane".
I think it's supposed to be "airplane".
I really don't know what these fields do. They are new.
If anyone knows, please advise.
As usual, the help file is many versions behind.

Sent from my iPlay_50 using Tapatalk
 
You must log in or register to reply here.
Top Bottom