Just a warning to the people like me crazy enough to run some reolink cams on Blue Iris, i had severe issues updating from 5.9.9.14 to 5.9.9.19.
The RLC-811A with hardware model IPC_560B158MP & Duo 2 PoE model IPC_529B17B8MP are stuttering and glitching after the update. I rolled the update back to .14 and no issues.
Maybe it's something specific in my setup, software, windows install. I don't know. I do know that after spending many hours troubleshooting those reolink cam's i'm really done with it now
All other cams work fine, even tested on the cat6a cables that the reolinks use.
I'm using this as an excuse to finally replace these problematic cams. If you have these cams and are not in the position to upgrade the cam itself, maybe don't update BI until you do.
The RLC-811A with hardware model IPC_560B158MP & Duo 2 PoE model IPC_529B17B8MP are stuttering and glitching after the update. I rolled the update back to .14 and no issues.
Maybe it's something specific in my setup, software, windows install. I don't know. I do know that after spending many hours troubleshooting those reolink cam's i'm really done with it now
All other cams work fine, even tested on the cat6a cables that the reolinks use.
I'm using this as an excuse to finally replace these problematic cams. If you have these cams and are not in the position to upgrade the cam itself, maybe don't update BI until you do.
