Can`t activate camera
- Thread starter mikislv
- Start date
What browser are you using?
Try Pale Moon 32 bit or Internet Explorer, as below:
How to enable native Internet Explorer in Windows 10 and 11:
Try Pale Moon 32 bit or Internet Explorer, as below:
How to enable native Internet Explorer in Windows 10 and 11:
- Open Notepad:
- Copy then paste the single line of code below into Notepad:
- eObject("InternetExplorer.Application").Visible=true
- Save as OpenIE.vbs
- Make sure the the file name ends in .vbs not .txt, If it ends in .txt you must rename to .vbs
- Create a shortcut to the above file and double-click it anytime you want native Internet Explorer.
none of Your solution worked
Edge in IE mode
You were using that already or that worked for you?
tigerwillow1
Known around here
You can try Config Tool to see if that works. It has a 100% track record for me.
It gives me error. The subnet and everything else is right.
Attachments
tigerwillow1
Known around here
Somebody with a POE NVR help me here.
Is the 10.18.1.240 IP address one assigned by an NVR?
I'm thinking since it's not the default new camera IP address, the camera is already initialized, or in some weird in-between state, and it needs to be factory reset so its IP address is set back to 192.168.1.108. Then it should be able to be initialized.
Is this a case of using a camera incorrectly with a POE NVR?
Is the 10.18.1.240 IP address one assigned by an NVR?
I'm thinking since it's not the default new camera IP address, the camera is already initialized, or in some weird in-between state, and it needs to be factory reset so its IP address is set back to 192.168.1.108. Then it should be able to be initialized.
Is this a case of using a camera incorrectly with a POE NVR?
No its static. Like 2 times a year camera gets defaulted randomly by itself. All it keeps is ip adress
bigredfish
Known around here
I think its already initialized and someone manually assigned that IP
I would factory default it with the physical button which will clear that IP and reset it to 192.168.1.108 un-iniitialized
I would factory default it with the physical button which will clear that IP and reset it to 192.168.1.108 un-iniitialized
tigerwillow1
Known around here
I believe the ip address not being 192.168.1.108 shows it's already initialized. Then again, the screen shot in the first post indicates it's not initialized. To me, the reset button would be the only hope, and also hope it's a model with an easily accessible reset button.
bigredfish
Known around here
Right, but upon full factory reset it will default back to uninitialized I think