Can't find cameras

[amrogers3]

I am using NVR608-32-4KS2. I added a couple cameras to NVR, initialized, changed IP address and everything was working fine.

I needed to delete couple cameras from the Added Devices list in the NVR and I was to re-add them in a specific order. Problem is, now I can't find the cameras. I tried finding them via NVR and via the Dahua Config Tool. They simply just dont show up anywhere even though these cameras have already been initialized and added.

Any suggestions on what I need to do to be able to find the cameras?

 

[genelit]

Hi,

How are the cameras connected? Directly to the POE-ports of the NVR or in your LAN?

I would connect one camera at the time your normal LAN and look for the IP 192.168.1.108 (Default Dahua IP), one canera at the time.
Make sure you're computer is in the 192.168.1.x range (!!), you may need to change IP depending on how your LAN is configured.

BTW, you don't need to remove the cameras to change the channel. You can do that in the camera settings in the device list of the NVR.