I've purchased a capture advance poe nvr/5mp turret camera bundle for the first time. I can see the cameras assigned IP address from the NVR on the channel page but not getting the green check. When I select the box to add I get a message that says select camera even though boxes are checked. I thought perhaps the cameras needed to be initialized so I've tried to browse the cameras separately but can't connect. I've downloaded the capture advance tool and have now results when trying to search. Anyone have any suggestions and/or know the default camera I.P. address? I've tried the following from searching on line, 192.168.1.100, 192.168.0.120, and 192.168.108.
Capture Advance Issue
- Thread starter mgr
- Start date
looney2ns
IPCT Contributor
PDF info below for both a Capture Advance 5MP camera and a NVR say they are set up for DHCP so they have no default, static IP. Yours may be different, depending on model number, but unlikely.
NVR