DAHUA AI 4.0 ,,, NOT ABLE TO TURN ON OR OFF SMART IR,, ALSO DO NOT SEE SETTINGS FOR CAMERA INTERNAL HEATER......

[Tonym]

HELLO EVERYONE,,, THANKS FOR A BIT OF HELP ....
SO I HAVE A DAHUA NVR MODEL NUMBER [NVR4208-8P-4KS2] CAMERA IS DAHUA [DH-IPC-HFW7842H-Z BULLET CAM]
ANDY FLASHED THE NVR WITH AI 4.0 FROM FEB 2020 IDONT SEE AND ADJUSTMENT TO ENABLE OR DISABLE SMART IR,,,,ALSO THINKING ABOUT THE CAMERA HEATER THAT I SEE NO CONTROL OF EITHER... ANDY GAVE ME AN UPDATED FIRMWARE FROM MARCH 2020 BUT THAT FIXED OTHER GLITCHES.... ANYONE HAVE AN IDEA OF HIOW I CAN FIND A FIRMWARE TO CONTROL THESE FEATURES? ALSO, IF I PURCHASE BLUEIRIS AND PLUG THE CAMERA INTO MY LAPTOP, CAN I GET INTO THE CAM AND MAKE ADJUSTMENTS THAT WILL STAY IN PLACE ONCE ITS RECONNECTED TO MY NVR?

 

[bigredfish]

You probably need to login to the camera itself.

 

[Tonym]

HELLO AND THANK YOU BIGREDFISH, GOING TO TRY IT NOW

 

[Tonym]

 

[Tonym]

Bigredfish, this is what i see... i do not have this cam and nvr connected to wifi... none at this location... what are my options on getting into cam settings and how ?

 

[bigredfish]

That firmware is not familiar to me at all? Mine is same model NVR with older 4.x firmware...odd

Maybe ask Andy how to access the cameras directly, there should be a way via the NVR like mine. Otherwise you will have to temporarily put your computer on the 10.1.1.x network to be able to access the web interface of the cameras...

 

[Tonym]

Hey thanks a bunch ill let you know how it works out thanks

 

[bigredfish]

Just to be sure, how are you accessing the NVR to see that interface? Via a web browser on your computer? Or directly connected to the NVR via a monitor?