Dahua lost signal for the 4th time

misterfredsr

misterfredsr

IPCT+ Member
Mar 19, 2016
131
108
PA
I have 4 IPC-T3241T-ZAS I bought from Andy about 4 years ago and I have 1 that I have lost the signal for the 4th time in about a year.
The configtool finds it, I can ping it but pale moon will not connect and when I run find/inspect it failed with HTTP 12029.
The last 3 time I reset the cam changed and the IP address back to my network and it worked fine, for a while. Never had any problems with the other 3.
I have never updated the any of my cams and all my cams are running on a dual NIC setup that's been working fine.
Is there any thing I can do to fix this problem?
Checked another IPC-T3241T-ZAS version and I'm not 100% positive that all 4 are the same.

System version Z2.800.15OG001.0.R 2020-11-24
WEB Version 3.2 1.984706
ONVIF Version 20. 06(V2.9.0.97937)

Thanks
Fred
 
misterfredsr said:
I have 4 IPC-T3241T-ZAS I bought from Andy about 4 years ago and I have 1 that I have lost the signal for the 4th time in about a year.
The configtool finds it, I can ping it but pale moon will not connect and when I run find/inspect it failed with HTTP 12029.
The last 3 time I reset the cam changed and the IP address back to my network and it worked fine, for a while. Never had any problems with the other 3.
I have never updated the any of my cams and all my cams are running on a dual NIC setup that's been working fine.
Is there any thing I can do to fix this problem?
Checked another IPC-T3241T-ZAS version and I'm not 100% positive that all 4 are the same.

System version Z2.800.15OG001.0.R 2020-11-24
WEB Version 3.2 1.984706
ONVIF Version 20. 06(V2.9.0.97937)

Thanks
Fred
Click to expand...
switch cables with another camera and see if this new camera loses signal over time.
 
  • Like
Reactions: bigredfish
flynreelow said:
switch cables with another camera and see if this new camera loses signal over time.
Click to expand...
I did that the first time it went out. I took it down and replaced it with another one and kept this one to play with so it is connected to a different cable. I even put a new SD card in it and it still died. I'm going to reset it again and leave it connected to the internet and have it check the web to see if there is an update for it. If that doesn't work I may take it apart to see if there is anything that look unusual in there.
Thank you for trying
Fred
 
misterfredsr said:
I did that the first time it went out. I took it down and replaced it with another one and kept this one to play with so it is connected to a different cable. I even put a new SD card in it and it still died. I'm going to reset it again and leave it connected to the internet and have it check the web to see if there is an update for it. If that doesn't work I may take it apart to see if there is anything that look unusual in there.
Thank you for trying
Fred
Click to expand...
some say to factory reset it a few times in a row.

not sure if that will help, but something to try
 
You must log in or register to reply here.
Top Bottom