I uploaded new firmware onto this unit and now it wont boot up correctly.
I am plugged into the RS232 and get this. It wont accept pressing the * during boot.
after 4 attempts it tries to restore. Does this several times.
Any ideas?
Special NAND id table Version 1.36
Nand ID: 0xEF 0xF1 0x80 0x95 0x00 0x00 0x00 0x00
stmmac_init,550,0x70431,3
PHY not link!
get_update_state,266,55,ff
get_update_state,266,aa,ff
get_update_state,266,5a,ff
* INFO * dul-backup state: NORMAL BOOT fail=3.
we are trying to restore it.
restore part: [reserve] src=0x4000000 dest=0x0 size=0x100000.
erase 100%
write 100% done!
restore part: [boot] src=0x4200000 dest=0x200000 size=0x100000.
erase 100%
write 100% done!
restore part: [uImage] src=0x4300000 dest=0x300000 size=0x400000.
erase 100%
write 100% done!
restore part: [rootfs] src=0x4700000 dest=0x700000 size=0x1a00000.
erase 100%
write 100% done!
restore part: [bootslave] src=0x6100000 dest=0x2100000 size=0x100000.
erase 100%
write 100% done!
restore part: [uImageslave] src=0x6200000 dest=0x2200000 size=0x300000.
erase 100%
write 100% done!
restore part: [rootfsslave] src=0x6500000 dest=0x2500000 size=0xe00000.
erase 100%
write 100% done!
restore part: [web] src=0x7300000 dest=0x3300000 size=0x500000.
erase 100%
write 100% done!
restore part: [custom] src=0x7800000 dest=0x3800000 size=0x200000.
erase 100%
write 100% done!
restore part: [logo] src=0x7a00000 dest=0x3a00000 size=0x200000.
erase 100%
write 100% done!
restore part: [config] src=0x7c00000 dest=0x3c00000 size=0x300000.
erase 100%
write 100% done!
restore part: [pmfirmware] src=0x7f00000 dest=0x3f00000 size=0x40000.
erase 100%
write 100% done!
restore part: [misc] src=0x7f40000 dest=0x3f40000 size=0xc0000.
erase 100%
write 100% done!
Special NAND id table Version 1.36
Nand ID: 0xEF 0xF1 0x80 0x95 0x00 0x00 0x00 0x00
stmmac_init,550,0x70431,3
PHY not link!
get_update_state,266,55,ff
get_update_state,266,aa,ff
get_update_state,266,5a,ff
* INFO * dul-backup state: NORMAL BOOT fail=4.
I am plugged into the RS232 and get this. It wont accept pressing the * during boot.
after 4 attempts it tries to restore. Does this several times.
Any ideas?
Special NAND id table Version 1.36
Nand ID: 0xEF 0xF1 0x80 0x95 0x00 0x00 0x00 0x00
stmmac_init,550,0x70431,3
PHY not link!
get_update_state,266,55,ff
get_update_state,266,aa,ff
get_update_state,266,5a,ff
* INFO * dul-backup state: NORMAL BOOT fail=3.
we are trying to restore it.
restore part: [reserve] src=0x4000000 dest=0x0 size=0x100000.
erase 100%
write 100% done!
restore part: [boot] src=0x4200000 dest=0x200000 size=0x100000.
erase 100%
write 100% done!
restore part: [uImage] src=0x4300000 dest=0x300000 size=0x400000.
erase 100%
write 100% done!
restore part: [rootfs] src=0x4700000 dest=0x700000 size=0x1a00000.
erase 100%
write 100% done!
restore part: [bootslave] src=0x6100000 dest=0x2100000 size=0x100000.
erase 100%
write 100% done!
restore part: [uImageslave] src=0x6200000 dest=0x2200000 size=0x300000.
erase 100%
write 100% done!
restore part: [rootfsslave] src=0x6500000 dest=0x2500000 size=0xe00000.
erase 100%
write 100% done!
restore part: [web] src=0x7300000 dest=0x3300000 size=0x500000.
erase 100%
write 100% done!
restore part: [custom] src=0x7800000 dest=0x3800000 size=0x200000.
erase 100%
write 100% done!
restore part: [logo] src=0x7a00000 dest=0x3a00000 size=0x200000.
erase 100%
write 100% done!
restore part: [config] src=0x7c00000 dest=0x3c00000 size=0x300000.
erase 100%
write 100% done!
restore part: [pmfirmware] src=0x7f00000 dest=0x3f00000 size=0x40000.
erase 100%
write 100% done!
restore part: [misc] src=0x7f40000 dest=0x3f40000 size=0xc0000.
erase 100%
write 100% done!
Special NAND id table Version 1.36
Nand ID: 0xEF 0xF1 0x80 0x95 0x00 0x00 0x00 0x00
stmmac_init,550,0x70431,3
PHY not link!
get_update_state,266,55,ff
get_update_state,266,aa,ff
get_update_state,266,5a,ff
* INFO * dul-backup state: NORMAL BOOT fail=4.