DAHUA NVR DHI-NVR4104-P-4KS2 -- Configure HDMI --

[Phil_Fr]

I have the Dahua equipment below:

• DAHUA PTZ Camera DH-SD1A203T-GN
• DAHUA NVR DHI-NVR4104-P-4KS2

Hello,
I am new to the forum and my name is Philippe.
Sorry for my bad english, I'm french ... lol

I have just one camera.
I would like to know how to configure, if it's possible, the NVR to view on a television set connected to the HDMI plug of the NVR a single-camera picture. And not a split with four screen with three black windows.

Thank you in advance for your answers.

Philippe

 

[paul@austins.tv]

On your mouse. Right click, then view 1

 

[eggsan]

as paul@austins.tv mentioned, use your nvr mouse to select (right click on the main screen) the desire format (view-1)

 

[Phil_Fr]

Thank you for your answers, paul@austins.tv and eggsan.

I will try your proposal tomorrow.

Are you sure that this change doesn't only concern the VGA output but also concern the HDMI output for a televiseur ?
(Because right click on the TV is not possible ... lol)

 

[eggsan]

it has simultaneous video output at both hdmi/vga. You should have no problem

 

[Phil_Fr]

You’re right.
I've done the setup and it work

Thank you so much