ARC5402A-W | |
Name | Video Alarm Control Panel |
System | |
Main Processor | High-performance industrial embedded microcontroller |
Operating System | Embedded LINUX |
In and Out | |
Wired Zones | 2 on-board zones |
Wireless Zones | 28 wireless detectors, 2-way communication, transmission range up to 150m open space |
Alarm Output | 1-ch relay output |
Tamper Funtion | 1 tamper switch |
Wireless keyfob | 8 wireless keyfobs |
Siren | 4 wireless sirens + 1 wired siren |
Storage | Max 128GB micro SD card for video recording, USB device to backup video |
ID Card | RFID reader(arm/disarm) |
Network | |
Network Function | TCP/IP, DHCP, WIFI, P2P, IP Search(Support IP camera), DMSS |
Interface | |
Network Interface | 1 RJ-45 Port(10/100Mbps) |
RS485 | 1 Port |
PSTN | 2 groups PSTN, support Contact ID standard protocol alarm |
Wired Siren | 1 wired siren(12V/0.5A) |
Auxiliary Power Output | 1 auxiliary power output(12V/0.5A) |
Reset | Insert two ends of cable into the holes to reset |
USB | 1 USB 2.0 port to record or upgrade |
Audio and Video | |
IP Camera Channel | 4 Channel |
Compression | H.264 |
Resolution | D1 |
LCD Screen | 4.3 inch TFT screen, 480*272 resolution |
Audio In | 1 ch audio in for 30s voice message |
Audio Out | 1 ch audio out for voice and alarm broadcast |
Upgrade | |
Remote Upgrade | USB disk or ConfigTool to remotely upgrade |
General Parameters | |
Main Power | DC12V/2A |
Backup Battery | 3.7V/1900mAh, Li-ion |
Power Consumption | ≤5W |
Operating Temperature | -10℃~ +55℃ |
Humidity | 10% ~ 90% |
Device Dimensions | 216*118*28mm |
Device Weight | <1kg |
Installation | Wall mounting |
ARD1231-W | |
Name | Wireless passive infrared sensor |
Detection | Passive infrared |
Detection Range | 12m×12m, 90° |
Alarm prompt | Red LED, can be set to switch off |
Sensitivity | Two level (jumper) |
Wireless Frequency | 433/868MHz |
Transmit power | 10dBm |
Transmit distance | 150m open area/no interference |
Pet immunity | ≤18Kg |
Resistance light | 6500LUX |
Working environment | -10°C~+50°C, humidity <95° |
Overall dimensions/weight | 105mmx62mmx41.3mm/0.1kg |
Tamper | Unit protection and leaving-wall protection |
Power | 1xCR123A battery |
Installation height | Wall mount, 2.2-2.5m |
ARD1611-W | |
Name | Wireless Curtain PIR Detector |
Detection | Passive infrared |
Detection Range | 10m/15° |
Alarm prompt | Notification LED light, can be set to switch off |
Sensitivity | Two level (jumper switch) |
Wireless Frequency | 433/868MHz |
Transmit power | 10dBm |
Transmit distance | 150m, open area/no interference |
Resistance light | 6500LUX |
Tamper | Unit protection and leaving-wall protection |
Power | 1xCR123A battery |
Working environment | -10°C~+50°C, humidity <95° |
Overall dimensions/weight | 99mmx52mmx35mm/0.1kg |
Installation height | Ceiling/Wall mount, 2.2-2.5m |
Installation height | Wall mount, 2.2-2.5m |
ARD311-W | |
Name | Wireless door sensor |
Motion distance | 25-40mm |
Alarm prompt | Notification LED light, can be set to switch off |
Wireless Frequency | 433/868MHz |
Transmit Power | 10dBm |
Transmit Distance | 150m(open area/no interference) |
Tamper | Front cover and rear cover protection |
Power | 1xCR123A battery |
Installation Way | Screw and glue |
Dimensions | 84*39*22mm |
Weight | 0.1kg |
Temperature | -10°C~50°C |
Humidity | < 95% |
Installation | Screw or glue to mount |
ARD800-W | |
Name | Panic Button |
Trigger Alarm | Button pressed down |
Alarm prompt | Alarm success: green LED on |
Alarm failure: red LED on | |
Wireless Frequency | 433/868MHz |
Transmit Power | 10dBm |
Transmit Distance | 150 meters(open area/no interference) |
Indoor 30 meters, 1 wall capability | |
Power | 1xCR2450 battery |
Dimensions | 42*43.8*13mm |
Weight | 0.05kg |
Temperature | -10°C~55°C |
Humidity | < 95% |
Installation | Hang on the neck or 3M glue to mount |
ARA22-W | |
Name | Remote keyfob |
Working Voltage | DC3.0V |
Frequency | 433/868MHz |
Transmit Power | 10dBm |
Key | Away Arm/Stay Arm/Disarm/SOS |
Temperature | -10°C~55°C |
Ingress protection | IP20 |
Dimension | 62*30*14mm |