Hi all,
I have successfully set up an IP video door station comprising a VTO2110 and a VTH5341.
Additionally, I've integrated two IP cameras (IPC-HFW1230) into the setup, and the entire system is operational.
Furthermore, I've incorporated two detectors into the system, connecting them to the alarm inputs of the VTH.
Upon activation of these detectors, either individually or simultaneously, I observe the corresponding 'Alarm Protection Area' 'Zone 1' or 'Zone 2' indications on the VTH.
I'm encountering difficulty in configuring the system to automatically display Camera 1 or Camera 2 on the VTH when the alarm is activated. (Camera 1 for Zone 1 and Camera 2 for Zone 2)
Can someone help me to find a solution to display CAM1 or CAM2 on the VTH when External Alarms is activated? Please!
Thank you.
I have successfully set up an IP video door station comprising a VTO2110 and a VTH5341.
Additionally, I've integrated two IP cameras (IPC-HFW1230) into the setup, and the entire system is operational.
Furthermore, I've incorporated two detectors into the system, connecting them to the alarm inputs of the VTH.
Upon activation of these detectors, either individually or simultaneously, I observe the corresponding 'Alarm Protection Area' 'Zone 1' or 'Zone 2' indications on the VTH.
I'm encountering difficulty in configuring the system to automatically display Camera 1 or Camera 2 on the VTH when the alarm is activated. (Camera 1 for Zone 1 and Camera 2 for Zone 2)
Can someone help me to find a solution to display CAM1 or CAM2 on the VTH when External Alarms is activated? Please!
Thank you.