DC 24V power connector for a DH-SD5A445XA-HNR

Buttan Butt

Buttan Butt

Getting the hang of it
Jun 4, 2017
88
56
Sweden yeah!
Hi everyone!

I'm preparing a power cable for a DH-SD5A445XA-HNR camera that’s currently installed in a remote location. Previously, I powered it via PoE, but that's no longer an option. I’ve confirmed that the camera requires a 24V DC power supply, but I’m unsure how to connect the power cable to the camera. I recall several cables coming from the camera, but I can’t remember if there was a specific 24V power connector.

To avoid any issues when I arrive at the site, I’d like to know if the camera has a dedicated connector for the 24V power input. If possible, could you provide the connector's name, type, or at least the dimensions I should expect?

Thanks in advance for any help or guidance!
 
Look on page 4, cable #3 of this PDF document. There's a red wire (+), a black wire (-) and a yellow/green wire (earth ground), no connector shown.
 
  • Like
Reactions: Buttan Butt
Buttan Butt said:
That confuses me. That would be a 24V AC power input and there is no such option for the DH-SD5A445XA-HNR according to the Technical Specification on the datasheet. I bought a 24V DC 5A Power supply.
Click to expand...
Yes but it's marked + and - and colored for DC. If it was AC only there's be no polarity markings or colors, IMO.
Generally an input that has internal rectifiers for AC can accept AC or DC.
 
  • Like
Reactions: Buttan Butt
You must log in or register to reply here.
Top Bottom