Difference between KD8003-IME1/S and KD8003-IME1/NS

[basti76nie]

Hello

what’s the difference between those two devices?
Obviously the /NS has no physical Button. Does this mean I can use my own Doorbell-PushButton or does this mean I have to use the SUB Modul DS-KD-DD?

 

[David L]

Hello

what’s the difference between those two devices?
Obviously the /NS has no physical Button. Does this mean I can use my own Doorbell-Button or does this mean I have to use the SUB Modul DS-KD-DD?

I don't have your answer but this is what I have found, that is if you have not already viewed them. Looks like you will need an input module with the /NS





Without Button:

 

[David L]

Here is a DS-KD-IN too.

https://www.hikvision.com/content/dam/hikvision/products/S000000001/S000000083/S000000129/S000000131/OFR002104/M000040070/Data_Sheet/DS-KD8003-IME1_NS_Module-Door-Station_Datasheet_V1.0_20201022.pdf

 

[basti76nie]

The DataSheet shows the same image of an KD8003-IME1 so I can’t find any difference.
And the DS-KD-IN doesn’t had a PushPutton Function.

 

[David L]

The DataSheet shows the same image of an KD8003-IME1 so I can’t find any difference.
And the DS-KD-IN doesn’t had a PushPutton Function.

Yeah other than /N is a surface mount only with button and the /NS is both without button.

I'm sorry, just trying to help...