H. Swanson
Getting the hang of it
I want to install my turret cam using the wall mount but the notch is on the wrong side for running the cable up my downspout. I’d have to run it around the mount. Has anyone drilled a new notch on a mount before?
Empire tech wall mount cable notch
- Thread starter H. Swanson
- Start date
Pretty sure you can rotate that, I've haven't had a problem.
You said "....for running the cable up my downspout" ; You're going to have the notch facing down, correct?
You said "....for running the cable up my downspout" ; You're going to have the notch facing down, correct?
H. Swanson
Getting the hang of it
This is for the wall mount PFB203W. You can’t rotate it. The notch is only on one side and that’s it.
fergenheimer
Getting comfortable
Yeah, I have. I ran some wiremold like this Legrand Wiremold 700 Series 5 ft. Metal Surface Raceway Channel, White BWH1 - The Home Depot to it. I used a deburring bit like Drill America 1/4 in. x 5/8 in. Tree Radius End Solid Carbide Burr Rotary File Bit with 1/4 in. Shank DULSF1 - The Home Depot to form the hole. Then I caulked it to make it water tight.
That's handy info....no, I guess you can't.
fergenheimer
Getting comfortable
I replaced that camera with another mount. This one replaced it so you can get the idea.
Attachments
H. Swanson
Getting the hang of it
Thanks for sharing