Fine-tuning a trigger at night

[BassTeQ]

Hello,

I have 2 zones setup A and B, I've setup to receive a notification when a person or car is found in Zone B. This works great during the day, however sometimes at night when cars drive past their headlights are triggering motion in A and B, and the AI in Zone B is detecting the parked car.
I have static object detection enabled.
Any ideas how to best tackle this?

Zone A


ZoneB


Here's a recording at 7:35pm which worked as expected, no alert was pushed
Video which shows the event ==> Video

AI Analysis


BI Log

3     9/08/2024 7:35:37.077 PM    Cam7                    Triggered: Motion_A
3     9/08/2024 7:35:38.806 PM    Cam7                    Re-triggered: Motion_AB
0     9/08/2024 7:35:47.173 PM    Cam7                    AI: Alert canceled [occupied] 1323ms

Here's a recording at 7:43pm which didn't worked as expected, the AI for some reason didn't see the parked car as a static object and sent a notification.
Video which shows the event ==> Video

AI Analysis


BI Log

3     9/08/2024 7:43:21.094 PM    Cam7                    Triggered: Motion_A
3     9/08/2024 7:43:21.667 PM    Cam7                    Re-triggered: Motion_AB
0     9/08/2024 7:43:30.158 PM    Cam7                    AI: [Objects] car:92% [2454,651 3603,1391] 3322ms
0     9/08/2024 7:43:30.158 PM    Cam7                    AI: car:92%
3     9/08/2024 7:43:30.158 PM    Cam7                    Alerted
0     9/08/2024 7:43:30.783 PM    Cam7                    Push: OK to S21

Thanks