firmware for DH-IPC-HDW3641TMP-AS-0360B-AUS

[tesla_truck]

hi guys,
I searched dahua website for the firmware for the camera with model no. = DH-IPC-HDW3641TMP-AS-0360B-AUS , and I couldn't find it. I am from Australia and got these cameras installed about 6 months ago.

I have also emailed dahua oceania tech support.

do anyone know where to find the upgrade firmware for the above device.

i shall be highly obliged.

thanks
G

 

[looney2ns]

Contact your local distributor for firmware.

 

[wittaj]

A common theme around here is don't fix what ain't broke. If the unit is working and meets your needs, in many instances an update breaks what you had working and provides you with something you didn't need. A Dahua Z12E that someone updated and then constantly reboots comes to mind, and a certain Dahua PTZ that loses autotracking with an update come to mind, a Hikvision ANPR camera losing half the FPS and loses the ability to read US plates - those are big deals to have happen. Don't do it unless it is fixing a problem you are experiencing or adds a feature you really need.

Further, it is best to obtain any firmware updates from the vendor you purchased it from so that you do not run into issues. Any firmware you find here or elsewhere is obviously proceed at your own risk. We have many threads here where someone tried an update with a firmware they found on the internet and bricked their unit.

Many units being sold are Chinese hacked units that will either brick or go into Chinese upon updating. Some vendors will be upfront and tell consumers that as part of their website, but many do not or the consumer forgets...here is one such example....

 

[iTuneDVR]

I searched dahua website for the firmware for the camera with model no. = DH-IPC-HDW3641TMP-AS-0360B-AUS , and I couldn't find it. I am from Australia and got these cameras installed about 6 months ago.

What is you current firmware version.
Screenshot fromweb please.

It's on of the DH IPC HX5XXX-Volt MultiLang NP Stream3 V2.800....
latest from augest 2021