Hi everybod.
I'm new in this forum, i had problem when i wanted delete password and reset dvr by uploading its firmware with TFTP Server and NCOM.
I got the following errors :
Someone can help me ????
I'm new in this forum, i had problem when i wanted delete password and reset dvr by uploading its firmware with TFTP Server and NCOM.
I got the following errors :
Code:
U-Boot 2016.07-svn5223 (Mar 12 2021 - 12:33:24 +0800), Build: jenkins-GSP_DH3.RD003604_X3_linux-309
CPU: Novatek NT @ 1200 MHz
Watchdog enabled
DRAM: 512 MiB
NAND: id = 0xc8 0x51 0xc8 0x51
nvt spinand 4-bit mode @ 80000000 Hz
128 MiB
MMC: NA51068_SDC: 0
[33mFirmware name: FW98321A.bin FW98321T.bin FW98321A.fdt.bin [0m
nvt_detect_fw_tbin Boot from flash or emmc
Open SD fail:[33m No SD device? [0m
DTS find cpu freq clock 1200MHz
Read power trim = 0x0000000d
cpu 1200 remap_data 54
Set CPU clk 1200MHz
Read power trim = 0x0000000d
ddr 2128 remap_data 30
run change to emb phy command
chang to emb eth phy
Net: na51068_eth_initialize 1.0.2.0
na51068_eth_initialize: dtb node /eth0@fcc00000 found
eqos_initialize 0xfcc00000
eth_parse_phy_intf: get IO MEM 0xfcc00000
DTS /eth0@fcc00000 found
LED2 pinmux 0x200046
eth_parse_phy_intf: phy_clk:0 ref-clk-out 0
eth_parse_phy_intf: pinmux detect emb phy 0x100
na51068_eth_initialize(1938) nodeoffset < 0
na51068_eth_initialize: path /eth1@fcd00000 not found
eth0
.........Error -3 while decompressing!
1faacdd8(26879)->1faf0f68
gzip uncompress failed with error code 0
read_block: failed to read block @0xffffffff
acor1awaitSomeone can help me ????