Foscam F41/FLC Blue Iris Config

NoDak

Getting the hang of it
Joined
May 2, 2021
Messages
108
Reaction score
45
Location
ND
for those that try to config foscam's new F41/FLC Floodlight cam in Blue Iris, you will have to do a manual setup. If you try to use the find/inspect feature of BI it will pick the wrong config. If you use any of the foscam settings you will get a stutter about every 3 secs in the video feed.

i blanked out the http ip and my user/password fields in the picture below. just remember you have to use port 88 (default unless you change it) when connecting to it. also note the rtsp port, onvif port, main profiles and onvif source " videosource_sourcetoken() "


Foscam F41-FLC Blue Iris Config.png
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
16,434
Reaction score
38,154
Location
Alabama
Thanks for the info, perhaps it'll help someone having an issue with their Foscam on BI. Having had a FI9831 in the past, I knew as well that the HTTP port was 88, not the normal 80.

FWIW, you didn't need to blank out your local, private IP (LAN), we all have 'em. My BI server's LAN IP is 192.168.1.239. It's your WAN IP you need to not disclose.
 
Top