Foscam FI8910W Firmware Update - March 20, 2014

[Mike]

The latest available firmware contains important security updates as well as addresses the following bugs:

1. Addresses a bug that the patrol speed will display incorrectly after setting;
2. Fixes bug where some parameters were lost after downgrading to version 54

The procedure for upgrading to the latest version is as follows

1. Firstly determine which firmware version currently exists on your FI8910W by checking under Settings > Device Status. You are looking for the "Device Firmware Version"
2. If you have Device Firmware Version 11.37.2.XX proceed to download and install the latest version 11.37.2.56 here
3. If you have Device Firmware Version 11.22.2.XX proceed to download and install the latest version 11.22.2.51 here
4. Please follow carefully the instructions contained in "How to upgrade firmware for MJPEG indoor PT camera.pdf" included in each download. Failure to install the firmware correctly could result in bricking your camera. If you are unsure on how to proceed, please stop immediately and post on the forum.

 

[mar.ste]

I cannot find anymore mine nor others on Foscam website, anyway my firmware is 11.37.2.59 (means seems more recent than the one indicated here!).
From webcam:
[TABLE="class: v2 f14 mid01, width: 100%"]
[TR]
[TD="class: bc2 mid04, width: 40%"]
Device ID
[/TD]
[TD="class: mid02"] 00626E4B2D72[/TD]
[/TR]
[TR]
[TD="class: bc2 mid04"] Device Firmware Version
[/TD]
[TD="class: mid02"] 11.37.2.59[/TD]
[/TR]
[TR]
[TD="class: bc2 mid04"] Device Embeded Web UI Version
[/TD]
[TD="class: mid02"] 2.4.10.4[/TD]
[/TR]
[/TABLE]

 

[mar.ste]

And since I do not remember when I updated it, it should not be recent!...
(and infact I was hoping to find a newer one)

 

[mar.ste]

The firmware 11.37.2.59 has bugs. Cannot set alarms!
Where I can find the latest firmware?